Datasheet > B82726S2243A020

B82726S2243A020

更新时间： 2024-03-03 10:10:04

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

B82726S2243A020 数据手册

Cautions and warnings

■ Please note the recommendations in our Inductors data book (latest edition) and in the data

sheets.

– Particular attention should be paid to the derating curves given there. Derating must be applied

in case the ambient temperature in the application exceeds the rated temperature of the

component.

– Ensure the operation temperature (which is the sum of the ambient temperature and the

temperature rise caused by losses / self-heating) of the component in the application does not

exceed the maximum value specified in the climatic category.

– The soldering conditions should also be observed. Temperatures quoted in relation to wave

soldering refer to the pin, not the housing.

■ If the components are to be washed varnished it is necessary to check whether the washing

varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,

or on glued joints. In particular, it is possible for washing varnish agent residues to have a

negative effect in the long-term on wire insulation.

Washing processes may damage the product due to the possible static or cyclic mechanical

loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,

which might lead to reduced reliability or lifetime.

■ The following points must be observed if the components are potted in customer applications:

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic

housing or core. This pressure can have a deleterious effect on electrical properties, and in

extreme cases can damage the core or plastic housing mechanically.

– It is necessary to check whether the potting material used attacks or destroys the wire

insulation, plastics or glue.

– The effect of the potting material can change the high-frequency behaviour of the components.

■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to

breakage of the core.

■ Even for customer-specific products, conclusive validation of the component in the circuit can

only be carried out by the customer.

Please read Cautions and warnings and

Important notes at the end of this document.

07/12

1 2 3 456

下载PDF

型号	品牌	描述	获取价格	数据表
B82726S3223A340	EPCOS	GENERAL PURPOSE INDUCTOR	获取价格
B82726S3223A340	TDK	L=1.7mH Rated current=25A	获取价格
B82726S3543N040	EPCOS	Power line chokes	获取价格
B82726S3543N040	TDK	L=0.19mH Rated current=54A	获取价格
B82726S6103N001	EPCOS	Power line chokes and DC intermediate circuits	获取价格
B82726S6103N001	TDK	L=2.2mH Rated current=10A	获取价格