5秒后页面跳转
捷配首页

Datasheet > B57020M2502A017
B57020M2502A017 PDF预览

B57020M2502A017

更新时间： 2024-03-03 10:10:27
品牌 Logo 应用领域
东电化 - TDK /
页数 文件大小 规格书
11页 298K
描述
Nominal Resistance=5kΩ

阅读下载

中文翻译

获取价格

B57020M2502A017 数据手册

 浏览型号B57020M2502A017的Datasheet PDF文件第3页浏览型号B57020M2502A017的Datasheet PDF文件第4页浏览型号B57020M2502A017的Datasheet PDF文件第5页浏览型号B57020M2502A017的Datasheet PDF文件第7页浏览型号B57020M2502A017的Datasheet PDF文件第8页浏览型号B57020M2502A017的Datasheet PDF文件第9页 
Temperature measurement  
Probe assemblies  
B57020M2  
M2020  
Mounting  
Ensure that no thermo-mechanical stress occurs due to production processes (curing or  
overmolding processes) when thermistors are sealed, potted or overmolded or during their  
subsequent operation. The maximum temperature of the thermistor must not be exceeded.  
Ensure that the materials used (sealing/potting compound and plastic material) are chemically  
neutral.  
Electrodes/contacts must not be scratched or damaged before/during/after the mounting  
process.  
Contacts and housing used for assembly with the thermistor must be clean before mounting.  
Ensure that adjacent materials are designed for operation at temperatures comparable to the  
surface temperature of the thermistor. Be sure that surrounding parts and materials can  
withstand the temperature.  
Avoid contamination of the thermistor surface during processing.  
The connections of sensors (e.g. cable end, wire end, plug terminal) may only be exposed to  
an environment with normal atmospheric conditions.  
Tensile forces on cables or leads must be avoided during mounting and operation.  
Bending or twisting of cables or leads directly on the thermistor body is not permissible.  
Avoid using chemical substances as mounting aids. It must be ensured that no water or other  
liquids enter the NTC thermistors (e.g. through plug terminals). In particular, water based  
substances (e.g. soap suds) must not be used as mounting aids for sensors.  
The use of no-clean solder products is recommended. In any case mild, non-activated fluxes  
should be used. Flux residues after soldering should be minimized.  
Operation  
Use thermistors only within the specified operating temperature range.  
Use thermistors only within the specified power range.  
Environmental conditions must not harm the thermistors. Only use the thermistors under  
normal atmospheric conditions or within the specified conditions.  
Contact of NTC thermistors with any liquids and solvents shall be prevented. It must be  
ensured that no water enters the NTC thermistors (e.g. through plug terminals). For  
measurement purposes (checking the specified resistance vs. temperature), the component  
must not be immersed in water but in suitable liquids (e.g. perfluoropolyethers such as Galden).  
Avoid dewing and condensation unless thermistor is specified for these conditions.  
Bending or twisting of cables and/or wires is not permissible during operation of the sensor in  
the application.  
Be sure to provide an appropriate fail-safe function to prevent secondary product damage  
caused by malfunction.  
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.  
Display of ordering codes for EPCOS products  
The ordering code for one and the same EPCOS product can be represented differently in data  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 6 of 11  
1...3456789...11

中文翻译

下载PDF

与B57020M2502A017相关器件

型号 品牌 获取价格 描述 数据表
B57020M2502A020 EPCOS

获取价格

 		NTC thermistors for temperature measurement
B57020M2502A020 TDK

获取价格

 		Nominal Resistance=5kΩ
B57-036-221-802 ETC

获取价格

 		Available in 50 and 64 positions
B57045K EPCOS

获取价格

 		NTC thermistors for temperature measurement
B57045K0102K000 EPCOS

获取价格

 		Temperature compensation (chassis mounting)
B57045K0102K000 TDK

获取价格

 		Nominal Resistance=1kΩ
B57045K0103A002 TDK

获取价格

 		Nominal Resistance=10kΩ
B57045K0103K000 EPCOS

获取价格

 		Temperature compensation (chassis mounting)
B57045K0103K000 TDK

获取价格

 		Nominal Resistance=10kΩ
B57045K0104K000 EPCOS

获取价格

 		Temperature compensation (chassis mounting)

与B57020M2502A017相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证