MODEL: B3FT
/Q: Option other than the above (specify the specification)
Space-saving Two-wire Signal
Conditioners B3-UNIT
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
THERMOCOUPLE TRANSMITTER
(field-configurable)
/C02: Polyurethane coating
Functions & Features
/C03: Rubber coating (UL not available)
• Converts a thermocouple input into an isolated, linearized
4 – 20 mA DC signal
• DIP switch configurable input range
• Cold junction compensation, linearization and burnout
• Monitor terminals
GENERAL SPECIFICATIONS
Construction: Small-sized front terminal structure
Connection: Euro type connector terminal
• High-density mounting
(applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm)
2
Housing material: Flame-resistant resin (gray)
Isolation: Input to output
18 (.71)
Burnout: Upscale (default), downscale or no burnout
selectable
Linearization: Standard
Cold junction compensation: CJC sensor attached to the
106
(4.17)
input terminals
Configuration: DIP switch
Setting:
• Input Type
110.5
(4.35)
• Input Range
mm (inch)
• Burnout
• Others
Refer to the instruction manual for details.
MODEL: B3FT–[1][2]
ORDERING INFORMATION
• Code number: B3FT-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. B3FT-1/UL/Q)
• Temperature range (e.g. J 0 – 400°C)
• If you need the transmitter to be calibrated to a specific
range, please specify when ordering.
Non-specified orders will be shipped at default factory
setting (K 0 – 300°C or E 0 – 250°C).
• Specify the specification for option code /Q
(e.g. /C01)
[1] INPUT THERMOCOUPLE
1: K (CA), J (IC), T (CC)
2: E (CRC), R, N
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: CE marking
/UL: UL approval, CE marking
Other Options
blank: none
B3FT SPECIFICATIONS
ES-7512 Rev.10 Page 1/4
https://www.m-system.co.jp/