Datasheet > B25668A7246A375

B25668A7246A375

更新时间： 2022-12-18 08:48:07

品牌	Logo	应用领域
爱普科斯 - EPCOS		电容器薄膜电容器功率因数校正
页数	文件大小	规格书
8页	259K
描述
Film capacitors - Power Factor Correction

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

B25668A7246A375 数据手册

Film capacitors – Power Factor Correction

PhaseCap capacitors

B25668A7246A375

MKK800-D-5-11

Overpressure disconnector

To ensure full functionality of an overpressure disconnector, the following must be observed:

1. The elastic elements must not be hindered, i.e.

- connecting lines must be flexible leads (cables),

- there must be sufficient space (min. 12 mm) for expansion above the connections. This will

enable a longitudinal extension of the can to secure the overpressure disconnector work.

- folding beads must not be retained by clamps.

2. Maximum allowed fault current of 10000 A in accordance with UL 810 standard must be assured by

the application.

3. Stress parameters of the capacitor must be within the IEC 60831 specification.

Overcurrent and short circuit protection

Use HRC fuses or MCCBs for short circuit protection. Short circuit protection and connecting

cables should be selected so that 1.5 times the rated capacitor current can be permanently

handled.

HRC fuses do not protect a capacitor against overload

- they are only for short circuit protection.

The HRC fuse rating should be 1.6 to 1.8 times rated capacitor current.

Do not use HRC fuses to switch capacitors (risk of arcing).

Use thermal magnetic over current relays for overload protection.

Resonance cases

Resonance cases must be avoided by appropriate application design in any case. Maximum total

RMS capacitor current (incl. fundamental harmonic current) specified in technical data must not be

exceeded.

Re-switching vs. phase-opposition

In case of voltage interruption, a sufficient discharge time has to be ensured to avoid phase-

opposition and resulting high inrush currents.

Vibration resistance

The resistance to vibration of capacitors corresponds to IEC 68, part 2–6.

Max. test conditions:

Test duration

6 h*

Frequency range 1

Displacement amplitude

10 ... 55 Hz*

0.75 mm*

*corresponding to max. 98.1 m/s” or 10 g

These figures apply to the capacitor alone. Because the fixing and the terminals may influence the

vibration properties, it is necessary to check stability when a capacitor is built in and exposed to

vibration. Irrespective of this, you are advised not to locate capacitors where vibration amplitude

reaches the maximum in strongly vibrating equipment.

FK PC PM PFC

June 2009

Please read Cautions and warnings and

Important notes at the end of this document.

Page 6 of 8

1...3 4 567 8

中文翻译

下载PDF

与B25668A7246A375相关器件

型号	品牌	获取价格	描述	数据表
B25668-A7246-A375	EPCOS	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 8 uF, STUD MOUNT, CAN
B25668A7376A375	EPCOS	获取价格	Film capacitors - Power Factor Correction
B25668-A7376-A375	EPCOS	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 12uF, STUD MOUNT
B25668A7496A375	EPCOS	获取价格	Film capacitors - Power Factor Correction
B25668-A7496-A375	EPCOS	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 17 uF, STUD MOUNT, CAN
B25668A7626A375	EPCOS	获取价格	Film capacitors - Power Factor Correction
B25668-A7626-A375	EPCOS	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 21 uF, STUD MOUNT, CAN
B25668A7746A375	EPCOS	获取价格	Film Capacitors - Power Factor Correction
B25668A7996A375	EPCOS	获取价格	Film capacitors - Power Factor Correction
B25668-A7996-A375	EPCOS	获取价格	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 33 uF, STUD MOUNT, CAN

与B25668A7246A375相关文章

压敏电阻器在直流电路中的过压保护应用探讨
2024-06-07

10
电感耐压值及其与电感大小的关系
2024-06-07

14
CNY17F光耦合器：特性、应用、封装、引脚功能及替换型号解析
2024-06-07

17
DS1307资料解析：特性、引脚说明、替代推荐
2024-06-07

10

产品中心

服务支持

精选活动

关于我们

帮助中心

B25668A7246A375

B25668A7246A375 数据手册

与B25668A7246A375相关器件

与B25668A7246A375相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

B25668A7246A375

B25668A7246A375 数据手册

与B25668A7246A375相关器件

与B25668A7246A375相关文章

您还可以找

您在本页遇到什么问题？