5秒后页面跳转
B25667C3497A375 PDF预览

B25667C3497A375

更新时间: 2022-05-18 18:50:42
品牌 Logo 应用领域
爱普科斯 - EPCOS 电容器
页数 文件大小 规格书
10页 135K
描述
PhaseCap Premium capacitors

B25667C3497A375 数据手册

 浏览型号B25667C3497A375的Datasheet PDF文件第4页浏览型号B25667C3497A375的Datasheet PDF文件第5页浏览型号B25667C3497A375的Datasheet PDF文件第6页浏览型号B25667C3497A375的Datasheet PDF文件第7页浏览型号B25667C3497A375的Datasheet PDF文件第9页浏览型号B25667C3497A375的Datasheet PDF文件第10页 
Film Capacitors – Power Factor Correction  
PhaseCap Premium capacitors  
B25667C3497A375  
MKK400-D-25-01  
Overpressure disconnector  
To ensure full functionality of an overpressure disconnector, the following must be observed:  
1. The elastic elements must not be hindered, i.e.  
Connecting lines must be flexible leads (cables).  
There must be sufficient space (min. 12 mm) for expansion above the connections. This will  
enable a longitudinal extension of the can to secure the overpressure disconnector work.  
Folding beads must not be retained by clamps.  
2. The maximum allowed fault current of 10000 A in accordance with UL 810 standard must be  
assured by the application.  
3. Stress parameters of the capacitor must be within the IEC60831 specification.  
Overcurrent and short circuit protection  
Use HRC fuses or MCCBs for short circuit protection. Short circuit protection and connecting  
cables should be selected so that 1.5 times the rated capacitor current can be permanently  
handled.  
HRC fuses do not protect a capacitor against overload – they are only for short circuit protection.  
The HRC fuse rating should be 1.6 to 1.8 times rated capacitor current.  
Do not use HRC fuses to switch capacitors (risk of arcing).  
Use thermal magnetic over current relays for overload protection.  
Resonance cases  
Resonance cases must be avoided by appropriate application design in any case. Maximum total  
RMS capacitor current (incl. fundamental harmonic current) specified in technical data must not be  
exceeded.  
Re-switching vs. phase-opposition  
In case of voltage interruption, a sufficient discharge time has to be ensured to avoid phase-  
opposition and resulting high inrush currents.  
Vibration resistance  
The resistance to vibration of capacitors corresponds to IEC 68, part 2–6.  
Max. test conditions:  
Test duration  
6 h*  
Frequency range 1  
10 ... 55 Hz*  
Displacement amplitude 0.75 mm*  
*corresponding to max. 98.1 m/s or 10 g  
FILM PFC PM  
January 2011  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 8 of 10  

与B25667C3497A375相关器件

型号 品牌 描述 获取价格 数据表
B25667C4127A375 EPCOS PhaseCap Premium capacitors

获取价格

B25667C4127A375 TDK Output[50Hz] = 7.5kvarOutput[60Hz] = 9kvar

获取价格

B25667C4177A375 EPCOS PhaseCap Premium capacitors

获取价格

B25667C4177A375 TDK Output[50Hz] = 10.4kvarOutput[60Hz] = 12.5kvar

获取价格

B25667C4197A375 EPCOS PhaseCap Premium capacitors

获取价格

B25667C4197A375(MKK400-D-10-01) TDK Output[50Hz] = 10kvarOutput[60Hz] = 12kvar

获取价格