Film capacitors – Power Electronic Capacitors
PEC ModCap HF series (high frequency)
B25647A*
ModCap HF
Technical data and specifications
Characteristics
Rated capacitance CN
Tolerance
Up to 1850 µF (see table)
K (±10%)
Rated voltage range UN
Ripple voltage Ur
Operation bandwidth 1) 2)
Rated current IR (3 kHz)
Inductance ESL (1 MHz) 2)
900 to 1600 V (see table)
Up to 424 Vpeak-peak
Up to 100 kHz
(see table)
8 nH
3)
Thermal Resistance Rth
1.4 K/W
1) RMS current value that corresponds to components above 100 kHz limited to 10% of total RMS. Maximum continuous losses defined for
rated current at 3 kHz should not be exceed. ESR vs frequency graph available in page 5 for losses calculation according to a specific
current spectrum. For more accurate thermal calculation, please ask for FEA simulation according to your specific operation conditions.
2) Connecting all independent capacitances by external overlapped busbar as described in page 4.
3) Calculated from Tamb to T Thot-Spot considering natural convection and no transfer of heat through the terminals.
HS
Maximum ratings
Maximum permissible voltage (Umax
)
UN +10% (30% of on-load daily duration)
UN +15% (up to 30 min daily)
UN +20% (up to 5 min daily)
UN +30% (up to 1 min daily)
Maximum permissible peak voltage
UN +50% for 30 ms is permitted 1000 times during the lifetime
of the capacitors
UTC (Isolation)
UTC (Extinction)
4 kV
2.5 kV (<10pC)
The average applied voltage shall not be higher than the specified voltage.
It should be recognised that any significant period of operation at voltages above the rated one would reduce overall life.
Test data
1.5 UN, DC, 10 s (room temperature)
Voltage test between terminals (UTT
)
Design data
Weight approx.
Fixing
3.6 ± 0.1 kg
4 x Ø 6.5 mm
Terminals
Terminations
Max. torque
8 x M6 x 25 x 30 mm, contact area 60 mm2
6 Nm
August 2023
Please read Cautions and warnings and
Page 3 of 11
Important notes at the end of this document.