Datasheet > AZPB70H

AZPB70H

更新时间： 2022-10-12 03:38:39

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

AZPB70H 数据手册

Arizona Microtek, Inc.

AZPB70

Programmer Board for AZT70/71

SOFTWARE OVERVIEW

The AZPB70 software operates under Windows XP SP2+, Windows Vista and Windows 7 operating systems. The

software package includes a USB driver and a PC based interface program.

DRIVER INSTALLATION

Install the USB software driver before plugging the programmer board into the USB port. *Note – User must have

administrator rights to computer. Plug the USB flash drive into an unused USB port on the computer. Run the program

entitled “/Software/CP210x_VCP_Win_XP_S2K3_Vista_7.exe” from the USB flash drive and follow the on-screen

instructions. After driver installation, plug the programmer board into a USB port on the computer.

PROGRAM INSTALLATION

Copy the file “/Software/AZT70_71Programmer.exe” from the USB flash drive into the desired directory on the computer

hard disk.

AZT70/71 MODE SELECTION

Jumper JPR1 on the programming board selects the AZT70 or AZT71 mode. It is located next to the 6-pin ribbon cable

connector (Figure 8). The programmer board enters the AZT71 mode without the jumper. The programmer board enters

the AZT70 mode when the jumper is installed.

Figure 8 – Programmer board jumper location

www.azmicrotek.com

+1-480-962-5881

Request a Sample

May 2012, Rev 1.2

1 2 3 456 7 8...15

下载PDF