AZ961
MINIATURE
POWER RELAY
FEATURES
• 1 Form A or 1 Form C
• Standard and sensitive coils
• All plastics rated 94V-0
• Epoxy sealed version available
• Class B insulation system
• UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
SPST NO (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res. N.O.
Ratings
Resistive load:
1 Form A
Max. switched power: 150 W or 1250 VA
Max. switched current: 5 A
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
Max. switched voltage: 150 VDC* or 300 VAC
(with no coil suppression)
1 Form C
Max. switched power: 150 W N.O. or 1250 VA
Max. switched current: 5 A
Max. switched voltage: 150 VDC* or 300 VAC
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
2000 Vrms coil to contact
4000 surge (2 x 10 us) coil to contact
*NOTE: If switching voltage is greater then 30 VDC, special precautions
must be taken. Please contact the factory.
Insulation Resistance 1000 megohms min. at 500 VDC,
20°C, 50% RH
UL, CUR
1 Form A
Dropout
Greater than 5% of nominal coil voltage
5 A at 250 VAC, General Use, 10k cycles [1]
3 A at 30 VDC, Resistive, 10k cycles [1]
5 A at 250 VAC, General Use, 100k cycles [2][3]
Ambient Temperature
Operating Standard: 40°C (-40°F) to 95°C (203°F)
Sensitive: 40°C (-40°F) to 100°C (212°F)
1 Form C
Storage
40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
10 g
5 A at 250 VAC, General Use, 10k cycles [1] N.O.
3 A at 250 VAC, General Use, 10k cycles [1] N.C.
5 A at 30 VDC, Resistive, 10k cycles [1] N.O.
3 A at 30 VDC, Resistive, 10k cycles [1] N.C.
5 A at 250 VAC, General Use, 100k cycles [2][3] N.O.
5 A at 250 VAC, General Use, 100k cycles [2][3] N.C.
B300 Pilot Duty N.O. [1]
Vibration
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
250°C (482°F)
Terminals
Silver cadmium oxide [1], silver tin oxide [2], silver nickel
[3]
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Material
Silver cadmium oxide, silver tin oxide or silver nickel
Gold plating available
5 seconds
80°C (176°F)
Max. Immersion Time 30 seconds
COIL
Weight
8 grams
Power
At Pickup Voltage
(typical)
Standard coil: 176 mW
Sensitive coil: 129 mW
NOTES
Max Continuous
Dissipation
1.5 W at 20°C (68°F)
1. All values at 20°C (68°F).
Temperature Rise
At nominal coil voltage:
Standard coil: 27°C (49°F)
Sensitive coil: 20°C (36°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. Temperature
130°C (266°F)
9/26/05W