AZ943
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
• High performance
• Low seated height
• Flux tight and sealed versions available
• Class F insulation (155°C) available
• UL, CUR file E43203
• TÜV file R50161256
GENERAL DATA
CONTACTS
Arrangement SPST (1 Form A)
Life Expectancy
Mechanical
Electrical
1 x 106
SPDT (1 Form C)
1 x 105 at 10A 277 VAC Res.
Ratings
Resistive load:
Operate Time
Release Time
10 ms max.
Max. switched power: 300 W or 2770 VA
Max. switched current: 15 A (AC), 10 A (DC)
Max. switched voltage: 30 VDC or 300 VAC
5 ms max.
(with no coil suppression)
Rated Load
UL
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms across contacts
1500 Vrms contact to coil
10 A at 277 VAC, general use, 70°C, 100k cycles
10 A at 30 VDC, resistive, 70°C (N.O.)
1.5 HP at 125 VAC, 70°C, 6k cycles (N.O.)
Insulation Resistance 100 megohms min. at 500 VDC,
50% RH
SPST (1 Form A)
Dropout
Ambient Temperature At nominal coil voltage
Operating -40°C(-40°F) to 70°C(158°F) class B
Greater than 10% of nominal coil voltage
15 A at 125 VAC, general use, 70°C, 6k cycles
12 A at 120 VAC, resistive, 70°C, 6k cycles
8 A at 125 VAC, tungsten, 70°C
-40°C(-40°F) to 85°C(185°F) class F
0.062" (1.5 mm) DA at 10–55 Hz
10 g
SPDT (1 Form C)
10 A at 120 VAC, resistive, 70°C, 100k cycles (N.O.)
10 A at 120 VAC, resistive, 70°C, 6k cycles (N.C.)
7 A at 30 VDC, resistive, 70°C (N.C.)
Vibration
Shock
TÜV
12 A at 125 VAC, resistive, 85°C, 10k cycles
10 A at 277 VAC, resistive, 85°C, 10k cycles
5 A at 250 VAC, resistive, 85°C, 25k cycles
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
SPST (1 Form A)
10 A at 277 VAC, resistive, 85°C, 25k cycles
5 seconds
Material
Silver tin oxide
80°C (176°F)
Resistance
< 100 milliohms initially
(at 24 V, 1 A, voltage drop method)
Max. Immersion Time 30 seconds
Weight
10 g
Packing unit in pcs
20 per plastic tube / 1000 per carton box
COIL
Power
NOTES
At Pickup Voltage
Max Continuous
Dissipation
203 mW
1.8 W at 20°C (68°F) Class B
2.4 W at 20°C (68°F) Class F
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
Temperature Rise
Temperature
32°C (58°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-06-26