AZ942H
16 AMP
MINIATURE
PC BOARD RELAY
FEATURES
• Extremely low cost
• 16 Amp switching capacity
• Proof tracking index (PTI/CTI) 250
• Clearance and creepage distance >2.5 mm
• Class F insulation (155 °C) available
• Meets IEEE 587 6 kV lightning surge
• UL, CUR file E44211
• VDE file 40026048
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
CONTACTS
Arrangement SPST (1 Form A)
7
1 x 10
5
1 x 10 at 10A 250 VAC Res.
Operate Time (typical) 10 ms at nominal coil voltage
SPDT (1 Form C)
Release Time (typical) 5 ms at nominal coil voltage
Ratings
Resistive load:
(with no coil suppression)
1 Form A
Max. switched power: 280 W or 4000 VA
Max. switched current: 16 A
Dielectric Strength
3000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms across contacts
Max. switched voltage: 150 VDC* or 300 VAC
Insulation Resistance 100 megohms min. at 20°C, 500 VDC,
50% RH
1 Form C
Max. switched power: 196 W or 1939 VA
Max. switched current: 12 A
Insulation
Overvoltage category: II
Pollution degree: 2
(according to
DIN VDE 0110,
IEC 60664-1)
Max. switched voltage: 150 VDC* or 300 VAC
Nominal voltage: 250 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Rated Load
UL
Operating
Class B: -40°C(-40°F) to 70°C(158°F)
1 Form A
Class F: -40°C(-40°F) to 85°C(185°F)
16 A at 250 VAC, resistive, 85°C, 50k cycles
12 A at 250 VAC, resistive, 85°C, 100k cycles
10 A at 277 VAC, resistive, 85°C, 25k cycles
10 A at 28 VDC, resistive, 85°C, 100k cycles
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time 30 seconds
Weight
0.062" (1.5 mm) DA at 10–55Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
1 Form C
16 A at 125 VAC, resistive, 85°C, 50k cycles (N.O.)
12 A at 250 VAC, resistive, 85°C, 100k cycles (N.O.)
12 A at 125 VAC, resistive, 85°C, 100k cycles (N.O.)
12 A at 125 VAC, resistive, 85°C, 100k cycles (N.C.)
7 A at 277 VAC, resistive, 85°C, 100k cycles
7 A at 28 VDC, resistive, 85°C, 100k cycles
80°C (176°F)
13 g
VDE
1 Form A
Packing unit in pcs
20 per plastic tube / 1000 per carton box
10 A at 250 VAC, resistive, 85°C, 50k cycles
COIL
1 Form C
10 A at 250 VAC, resistive, 85°C, 50k cycles (N.O.)
7 A at 250 VAC, resistive, 85°C, 50k cycles
Power
At Pickup Voltage
(typical)
230 mW
Material
Silver tin oxide
Resistance
< 100 milliohms initially
Max. Continuous
Dissipation
Class B: 1.7 W at 20°C (68°F) ambient
Class F: 2.2 W at 20°C (68°F) ambient
NOTES
Temperature Rise
Temperature
26°C (47°F) at nominal coil voltage
1. All values at 20°C (68°F)
Class B: Max. 130°C (221°F)
Class F: Max. 155°C (311°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2015-06-17