Datasheet > AVFU02461

AVFU02461

更新时间： 2022-05-28 12:36:34

品牌	Logo	应用领域
松下 - PANASONIC		开关
页数	文件大小	规格书
5页	120K
描述
ONE OF THE SMALLEST SNAP-ACTION SWITCHES

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

AVFU02461 数据手册

AV4

Hinge lever type

mm General tolerance: 0.15

2.5

0.8

CAD Data

(

)

P.T.

2.4 max.

3.0

0.11

(

)

F.P.

(

)

9.0 max.

O.P.

0.6

6.4

5.1 4.55

1.5

3.1

Pretravel

2.4 max.

1.4

Movement Differential

Overtravel

0.7 max.

0.4 min.

6.4 0.6

9.0 max.

Operating Position

Free Position

0.6

1.2

4.0

7.5

0.8

Note: All other dimensions are the same as

those of pin plunger type.

Simulated roller lever type

2.5

0.8

CAD Data

(

)

P.T.

2.2 max.

3.0

0.11

(

)

O.P.

0.5

6.7

0.7

(F.P.)

9.4 max.

Pretravel

2.2 max.

0.7 max.

0.3 min.

6.7 0.5

Movement Differential

Overtravel

Operating Position

Free Position

9.4 max.

Note: All other dimensions are the same as

those of pin plunger type.

NOTES

1. Mounting

2. Soldering

1) Manual soldering should be

accomplished within 5 seconds with max.

350°C iron.

3. Cleaning

1) After mounting and wiring, the

As AV4 switch is not completely sealed

construction, avoid cleaning.

4. Selection of switch

When specifying AV4 switches, allow

20% to the listed operating

insulation distance between ground and

each terminal should be conﬁrmed as

sufﬁcient.

Care should be taken not to apply force

to the terminals during soldering.

2) Terminal portion must not be moved

within 1 minute after soldering. Also no

tensile strength of lead wires should be

applied to the terminals.

3) When using the angle terminal type,

insert an insulation separator between

the switch body and the printed circuit

board (Insulation separator 0.2 to 0.4mm

thick) to prevent the soldering ﬂux from

ﬂowing under the PC board.

2) When the operation object is in the

free position, force should not be applied

to the actuator or to the pin plunger. Also

force should be applied to the pin plunger

from vertical direction to the switch.

3) In setting the movement after

operation, the over-travel should be set

within the range of the speciﬁed O.T.

value.

characteristics.

5. Avoid using and keeping switches

in the following conditions:

• In corrosive gases

• In a dusty environment

• Where silicon atmosphere prevails

6. When switching low-level circuits

(max. 100 mA), gold plate contact

types are recommended.

7. When using the lever type, avoid

applying force from the reverse and

side direction of actuating.

4) In fastening the switch body, use the

M1.4 screw, with tightening torque of not

more than 0.098 N·m.

AECTB16E 201201-T

Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e

1 2 3 45

中文翻译

下载PDF

与AVFU02461相关器件

型号	品牌	描述	获取价格	数据表
AVFU024NIL	PANASONIC	ONE OF THE SMALLEST SNAP-ACTION SWITCHES	获取价格
AVFU04461	PANASONIC	ONE OF THE SMALLEST SNAP-ACTION SWITCHES	获取价格
AVFU044NIL	PANASONIC	ONE OF THE SMALLEST SNAP-ACTION SWITCHES	获取价格
AVFU40461	PANASONIC	ONE OF THE SMALLEST SNAP-ACTION SWITCHES	获取价格
AVFU404NIL	PANASONIC	ONE OF THE SMALLEST SNAP-ACTION SWITCHES	获取价格
AVFU42461	PANASONIC	ONE OF THE SMALLEST SNAP-ACTION SWITCHES	获取价格