AUIRS20302S
Description
The AUIRS20302S is a three phase gate driver dedicated to BLDC motor drive up to 600W. Proprietary HVIC
technology enables this rugged monolithic design with enforced Automotive ESD & Latch-up grades. Primarily
designed for 24V battery application, its drive capability goes from 12v to 200V which cover all the abnormal
conditions of the vehicle. The gate drive circuitry features cross-conduction preventive and minimum dead-time
blocks. It is powered by a constant voltage so that the gate drives never exceed 17V including during Load Dump
condition.
An external MOSFET is acting as a pre-regulator. The inner charge pump and voltage control loop drives its gate in
order to keep the VPR pin constant when the battery voltage varies. The AUIRS20302S also features an over-
current protection that definitively shuts down all gates in case of short-circuit. The fault condition is reset by cycling
the FRST pin while the I.C is disabled. A blanking time, synchronized with each high side switch command, avoids
any premature triggering of the protection.
The logic control block of the AUIRS20302S is developed in order to support a fast and reliable 3 phase BLDC
design. For example, its inputs are compatible with the 3.3V logic processors and feature a short-pulse/noise
rejection filter. The 6 commands include matched propagation delays, shoot-through protections and minimum
dead-time. The bootstrap capacitor voltage of each phase is monitored independently (UVLO). Also, the maximum
gate voltage is controlled by the pre-regulator in all conditions. No linear or abnormal gate drive is possible. The
VPR pin can also supply the surrounding system components if the total consumption doesn’t exceed 0.1A.
3
www.irf.com
© 2014 International Rectifier
Submit Datasheet Feedback
May 28, 2014