ATS632LSA

更新时间： 2024-09-25 22:36:55

品牌	Logo	应用领域
急速微 - ALLEGRO		传感器换能器接近传感器
页数	文件大小	规格书
12页	120K
描述
ZERO-SPEED, SELF-CALIBRATING, NON-ORIENTED, HALL-EFFECT GEAR-TOOTH SENSOR

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ATS632LSA 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
包装说明：	SIP4,.3,50	Reach Compliance Code：	compliant
风险等级：	5.89	Is Samacsys：	N
主体高度：	9 mm	主体长度或直径：	7.8 mm
外壳：	PLASTIC	JESD-609代码：	e0
最大测量范围（毫米）：	2.5 mm	最小测量范围（毫米）：	0.3 mm
安装特点：	THROUGH HOLE MOUNT	端子数量：	4
最大工作电流：	15 mA	最高工作温度：	150 °C
最低工作温度：	-40 °C	输出：	PASSIVE PULL-UP
输出极性：	INVERTING	输出范围：	0.20-0.40V
输出类型：	DIGITAL VOLTAGE	封装主体材料：	PLASTIC/EPOXY
封装等效代码：	SIP4,.3,50	封装形状/形式：	ROUND
电源：	12 V	响应时间：	0.2 µs
传感器/换能器类型：	PROXIMITY SENSOR,HALL EFFECT	子类别：	Other Sensors
表面贴装：	NO	技术：	BIPOLAR
端子面层：	Tin/Lead (Sn/Pb)	端接类型：	SOLDER
Base Number Matches：	1

ATS632LSA 数据手册

ATS632LSA

HALL-EFFECT

GEAR-TOOTH SENSOR

SUBASSEMBLY

ATS632LSA

ZERO-SPEED, SELF-CALIBRATING,

NON-ORIENTED, HALL-EFFECT GEAR-TOOTH SENSOR

The ATS632LSA gear-tooth sensor is an optimized Hall-effect IC/

magnet combination that provides extremely accurate tooth edge

detection when used with large-pitch targets. The sensor subassembly

consists of a high-temperature plastic shell that holds together a

compound samarium-cobalt magnet and a single-element self-calibrat-

ing Hall-effect IC that has been optimized to the magnetic circuit. This

small package, with its non-oriented operation, can be easily as-

sembled on a PC board for complete protection and used in conjunc-

tion with a number of gear configurations.

The gear sensing technology used for this sensor subassembly is

Hall-effect based. The sensor incorporates a single-element Hall IC

that switches in response to absolute magnetic signals created by a

ferrous target. The digital output is LOW over a tooth and HIGH over a

valley. The sophisticated processing circuitry contains self-calibrating

Pin 1 = Supply

Pin 2 = Output

Pin 3 = Test Point

Pin 4 = Ground

Dwg. AH-006-2

6-bit A/D circuitry that adapts the thresholds to the peak-to-peak

signals to minimize the effects of variation in application air gap on

switch-point timing accuracy. The effects of system and device offsets

are minimized by using active offset cancellation circuitry. The digital

algorithm provides zero-speed detection capabilities without the

associated running jitter inherent in classical digital solutions.

PRELIMINARY INFORMATION

(subject to change without notice)

December 2, 1998

This sensor system is ideal for use in gathering speed, position

and profile information of ferrous objects. They are particularly suited

to large tooth/valley sensing applications where accurate timing

accuracy is a desired feature. For applications requiring the sensing of

fine-pitch gears, the ATS610LSA and ATS611LSB are recommended.

ABSOLUTE MAXIMUM RATINGS

Supply Voltage, V_CC.........................24 V*

Reverse Supply Voltage, V_RCC........ -24 V

Output OFF Voltage, V_OUT................. 25 V

Output Current, I_OUT.. Internally Limited

Reverse Output Current, I_OUT........ 50 mA

Package Power Dissipation,

continued next page…

P_D.................................... See Graph

Operating Temperature Range,

T_A............................ -40°C to +150°C

Storage Temperature, T_S............ +170°C

* Operation at increased supply voltages with

external circuitry is described in Applications

Information.

Always order by complete part number, e.g., ATS632LSA .

12 3 4 5 6 7...12

中文翻译

下载PDF

与ATS632LSA相关器件

型号	品牌	获取价格	描述	数据表
ATS632LSC	ALLEGRO	获取价格	ZERO-SPEED, SELF-CALIBRATING, NON-ORIENTED, HALL-EFFECT GEAR-TOOTH SENSOR
ATS635LSB	ALLEGRO	获取价格	Sensor/Transducer,
ATS635LSE	ALLEGRO	获取价格	Programmable Back Biased Hall-Effect Switch with TPOS Functionality
ATS635LSETN	ALLEGRO	获取价格	Hall Effect Sensor, 2.5mm Min, 2.5mm Max, 30-90mA, Round, Through Hole Mount, LEAD FREE, 4
ATS635LSETN-T	ALLEGRO	获取价格	Programmable Back Biased Hall-Effect Switch with TPOS Functionality
ATS636LSE	ALLEGRO	获取价格	Programmable Back Biased Hall-Effect Switch with TPOS Functionality
ATS636LSE_12	ALLEGRO	获取价格	The ATS636LSE programmable, true power-on state (TPOS), device is optimized Hall-effect IC
ATS636LSETN	ALLEGRO	获取价格	Hall Effect Sensor, 2.5mm Min, 2.5mm Max, 30-90mA, Round, Through Hole Mount, LEAD FREE, 4
ATS636LSETN-T	ALLEGRO	获取价格	Programmable Back Biased Hall-Effect Switch with TPOS Functionality
ATS-638194300	MOLEX	获取价格	Hand Crimp Tool for Wire-to-Board Terminal, 28-30 AWG Wire for Loose Parts Only

与ATS632LSA相关文章

塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
2024-09-29

9
英特尔震撼发布：128核心256线程的至强6性能核处理器
2024-09-29

8
SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

12
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

19

产品中心

服务支持

精选活动

关于我们

帮助中心

ATS632LSA

ATS632LSA 技术参数

ATS632LSA 数据手册

与ATS632LSA相关器件

与ATS632LSA相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ATS632LSA

ATS632LSA 技术参数

ATS632LSA 数据手册

与ATS632LSA相关器件

与ATS632LSA相关文章

您还可以找

您在本页遇到什么问题？