4.
LIN System-basis-chip Block
4.1
Features
●
●
●
●
●
●
Master and slave operation possible
Supply voltage up to 40V
Operating voltage VS = 5V to 27V
Typically 10µA supply current during sleep mode
Typically 35µA supply current in silent mode
Linear low-drop voltage regulator, 85mA current capability:
●
Normal, fail-safe, and silent mode
CC = 5.0V ±2%
In sleep mode VCC is switched off
●
V
●
●
●
●
●
●
●
●
●
●
●
●
●
VCC undervoltage detection (4ms reset time) and watchdog reset logical combined at open drain output NRES
Negative trigger input for watchdog
Adjustable watchdog time via external resistor
Boosting the voltage regulator possible with an external NPN transistor
LIN physical layer according to LIN 2.0, 2.1 and SAEJ2602-2
Wake-up capability via LIN-bus, wake pin, or Kl_15 pin
INH output to control an external voltage regulator or to switch off the master pull up resistor
TXD time-out timer
Bus pin is overtemperature and short-circuit protected versus GND and battery
Advanced EMC and ESD performance
Fulfills the OEM “Hardware Requirements for LIN in Automotive Applications Rev.1.1”
Interference and damage protection according to ISO7637
4.2
Description
The Atmel® ATA6630 is a fully integrated LIN transceiver, which complies with the LIN 2.0, 2.1 and SAEJ2602-2
specifications. It has a low-drop voltage regulator for 5V/85mA output and a window watchdog. The voltage regulator is able
to source up to 85mA, but the output current can be boosted by using an external NPN transistor. The Atmel ATA6630 is
designed to handle the low-speed data communication in vehicles, e.g., in convenience electronics. Improved slope control
at the LIN-driver ensures secure data communication up to 20kBaud. Sleep Mode and Silent Mode guarantee very low
current consumption.
ATA6614Q [DATASHEET]
7
9240I–AUTO–03/16