AT27C1024
9. AC Characteristics for Read Operation
AT27C1024
-45
-70
Symbol
Parameter
Condition
CE = OE = VIL
OE = VIL
Min
Max
Min
Max
70
Units
ns
(1)
tACC
Address to Output Delay
CE to Output Delay
OE to Output Delay
45
45
20
20
(1)
tCE
70
ns
(1)
tOE
CE = VIL
25
ns
(1)
tDF
OE or CE High to Output Float, Whichever Occurred First
25
ns
Output Hold from Address, CE or OE, Whichever
Occurred First
tOH
7
7
ns
Note:
1. See AC Waveforms for Read Operation.
10. AC Waveforms for Read Operation(1)
Notes: 1. Timing measurement reference level is 1.5V for -45. Input AC drive levels are VIL = 0.0V and VIH = 3.0V. Timing measure-
ment reference levels for all other speed grades are VOL = 0.8V and VOH = 2.0V. Input AC drive levels are VIL = 0.45V and VIH
= 2.4V.
2. OE may be delayed up to tCE - tOE after the falling edge of CE without impact on tCE
.
3. OE may be delayed up to tACC - tOE after the address is valid without impact on tACC
.
4. This parameter is only sampled and is not 100% tested.
5. Output float is defined as the point when data is no longer driven.
5
0019M–EPROM–12/07