Data Sheet
12V Pico TLynxTM 6A: Non-isolated DC-DC Power Modules
4.5 – 14Vdc input; 0.59Vdc to 5.5Vdc output; 6A output current
December 15, 2009
Shock and Vibration
The ruggedized (-D version) of the modules are designed to withstand elevated levels of shock and vibration to be able
to operate in harsh environments. The ruggedized modules have been successfully tested to the following conditions:
Non operating random vibration:
Random vibration tests conducted at 25C, 10 to 2000Hz, for 30 minutes each level, starting from 30Grms (Z axis) and
up to 50Grms (Z axis). The units were then subjected to two more tests of 50Grms at 30 minutes each for a total of 90
minutes.
Operating shock to 40G per Mil Std. 810F, Method 516.4 Procedure I:
The modules were tested in opposing directions along each of three orthogonal axes, with waveform and amplitude of
the shock impulse characteristics as follows:
All shocks were half sine pulses, 11 milliseconds (ms) in duration in all 3 axes.
Units were tested to the Functional Shock Test of MIL-STD-810, Method 516.4, Procedure I - Figure 516.4-4. A shock
magnitude of 40G was utilized. The operational units were subjected to three shocks in each direction along three axes
for a total of eighteen shocks.
Operating vibration per Mil Std 810F, Method 514.5 Procedure I:
The ruggedized (-D version) modules are designed and tested to vibration levels as outlined in MIL-STD-810F, Method
514.5, and Procedure 1, using the Power Spectral Density (PSD) profiles as shown in Table 1 and Table 2 for all axes.
Full compliance with performance specifications was required during the performance test. No damage was allowed to
the module and full compliance to performance specifications was required when the endurance environment was
removed. The module was tested per MIL-STD-810, Method 514.5, Procedure I, for functional (performance) and
endurance random vibration using the performance and endurance levels shown in Table 1 and Table 2 for all axes.
The performance test has been split, with one half accomplished before the endurance test and one half after the
endurance test (in each axis). The duration of the performance test was at least 16 minutes total per axis and at least
120 minutes total per axis for the endurance test. The endurance test period was 2 hours minimum per axis.
Table 1: Performance Vibration Qualification - All Axes
Frequency
(Hz)
PSD Level
(G2/Hz)
Frequency
(Hz)
PSD Level
(G2/Hz)
Frequency
(Hz)
PSD Level
(G2/Hz)
10
30
40
50
90
110
130
140
1.14E-03
5.96E-03
9.53E-04
2.08E-03
2.08E-03
7.05E-04
5.00E-03
8.20E-04
170
230
290
340
370
430
490
560
2.54E-03
3.70E-03
7.99E-04
1.12E-02
1.12E-02
8.84E-04
1.54E-03
5.62E-04
690
800
890
1070
1240
1550
1780
2000
1.03E-03
7.29E-03
1.00E-03
2.67E-03
1.08E-03
2.54E-03
2.88E-03
5.62E-04
Table 2: Endurance Vibration Qualification - All Axes
Frequency
(Hz)
PSD Level
(G2/Hz)
Frequency
(Hz)
PSD Level
(G2/Hz)
Frequency
(Hz)
PSD Level
(G2/Hz)
10
30
40
50
90
110
130
140
0.00803
0.04216
0.00674
0.01468
0.01468
0.00498
0.03536
0.0058
170
230
290
340
370
430
490
560
0.01795
0.02616
0.00565
0.07901
0.07901
0.00625
0.01086
0.00398
690
800
890
1070
1240
1550
1780
2000
0.00727
0.05155
0.00709
0.01887
0.00764
0.01795
0.02035
0.00398
LINEAGE POWER
19
5秒后页面跳转
深入解析CS8416引脚说明、参数、技术特点
TPA3116D2功放芯片参数详解、引脚说明
移位寄存器74HC165引脚说明、驱动程序示例解读
深入解析AD9833：DDS频率合成器的卓越性能与广泛应用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
