AP3190
PRIMARY SIDE REGULATED SWITCHING MODE POWER SUPPLY CONTROLLER
Description
Pin Assignments
The AP3190 is a high-performance offline PSR AC/DC power supply
controller. It is specially designed for the applications that require the
higher efficiency at light load and cost effectiveness. Using the multi-
mode control scheme, AP3190 can also achieve high-conversion
efficiency with full-load conditions.
(Top View)
OTP
1
2
3
6
5
4
CS
At heavy load and low line, AP3190 will operate in QR mode to
achieve high performance. When the load is decreasing, it will enter
fixed switching frequency operating mode. To optimize product
performance, the fixed frequency is different in high line (60kHz) and
low line (80kHz). At light load or no load, the IC will operate in burst
mode to minimize power consumption.
OUT
VCC
GND
FB
SOT26 (Type SM)
The AP3190 provides comprehensive protections without additional
circuitry. It includes VCC overvoltage protection, output overvoltage
protection, output short-circuit protection, etc. AP3190 has adjustable
OTP by external NTC resistor. Besides, AP3190 consumes less than
65mW input power at no-load condition with high-line voltage.
Applications
Adapters/chargers
Smart speakers
Set-top box power supplies
Network adaptors
AP3190 is packaged in SOT26 (Type SM).
Features
Burst Mode Operation for Light Load High Efficiency (at 10%
Loading > 80%)
Primary Side Control for Eliminating Optocoupler
65mW No-Load Input Power
Adjustable Overtemperature Protection
Multiple QR/AM Mode to Improve Audio Noise and Efficiency
QR for Higher Efficiency and Better EMI
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP
capable, and manufactured in IATF 16949 certified facilities),
please contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 12
www.diodes.com
July 2023
AP3190
© 2023 Copyright Diodes Incorporated. All Rights Reserved.
Document number: DS45747 Rev. 2 - 2