Series AMLDL-RZ
Up to 700mA | LED Driver
General Specifications (continued)
Parameters
Maximum case temperature
Conditions
Typical
Maximum
105
Units
oC
Thermal Impedance
Cooling
Free air convection
+40
oC/W
Free air convection
Humidity
95
% RH
Case material
Weight
Non-Conductive Black Plastic (UL94-V0 rated)
2.6
g
Dimensions (L x W x H)
MTBF
Maximum Soldering Temperature
NOTES:
0.80 x 0.40 x 0.27 inches
>1, 600,000 hrs (MIL-HDBK-217 F at +25 oC)
1.5mm from case for 10sec.
20.32 x 10.16 x 6.88 mm
260
oC
1.Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2.Leave the pin VADJ opened if not used , grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3.Maximum output open voltage is equal to input voltage
Safety Specifications
Parameters
Agency approvals
CE, EN 55015, EN 61547
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Standards
Pin Out Specifications
Pin
1
2
7
8
Single
- V Input
Vadj
- V Output
+ V Output
+ V Input
- DC Supply
PWM/ON/OFF or not used
LED Cathode connection
LED Anode connection
+ DC Supply
14
www.aimtec.com
F 051e R12.F
Tel: +1 514 620 2722
2 of 17
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only