Series AMER90-CAZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
FEATURES:
• Constant current LED Driver or Converter
• Input range 90-305VAC/47-440Hz
• High Efficiency up to 91%
•
•
•
•
•
Over Temperature Protection
Waterproof Case rated IP68
Power Factor Correction
Short Circuit Protection
• 115VAC Operating temperature -50 to 85°C
• 230VAC Operating temperature -55 to 85°C
Over Current Protection
②
• Dimmable via analog / 0-10V dimming
Models
Single output
Output
Max
Output
Input
Voltage
(VDC)
Voltage
Output
Power
(W)
Input Voltage
Efficiency
Current
Model
Mode of Operation
Range (V)
(VAC/Hz)
(%)
③
(A)
③
①
Constant Current
91
89
90
88
89
88
AMER90-50180CAZ
AMER90-36250CAZ
AMER90-24375CAZ
90
90
36-50
24-36
12-24
0-1.8
0-2.5
90-305/47-440
90-305/47-440
90-305/47-440
120-430
120-430
120-430
②
Constant Voltage
Constant Current
②
Constant Voltage
Constant Current
90
0-3.75
②
Constant Voltage
Add Suffix “-F”
No dimming option
①
Exceeding the maximum output power will permanently damage the converter
The dimming feature is not supported when units are used in Constant Voltage mode only, Aimtec suggests to order “-F” No dimming
②
option in this case.
③
In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown.
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters
Conditions
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
Typical
40
Maximum
Units
Inrush current <2ms
A
50
0.5
0.75
1.4
0.46
Leakage current
AC current
mA
A
0.98
0.94
Power Factor
External fuse
Start up time
Surge voltage
250V/2.5A
900
ms
V
2sec
440
Output Specifications
Parameters
Current accuracy
Line regulation
Conditions
Typical
Maximum
Units
%
%
±3
±1
LL-HL
Load regulation
Ripple & Noise
Hold-up time
Current adjustment range
0-100% load
20MHz Bandwidth
±3
%
mV p-p
ms
④
100
100
100-0
%
Minimum Load Voltage
See the models table
④
Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end.
www.aimtec.com
F 052.1e R3.D
Tel: +1 514 620 2722
1 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only