LE (ALE)
2. Specifications
Characteristics
Item
Specifications
Contact material
Arrangement
AgSnO2 type
1 Form A
Contact
Contact resistance (Initial)
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
16A 277V AC
4,432VA
277V AC
Rating
Max. switching current
16A
Nominal operating power
Min. switching capacity (reference value)*1
400mW (Standard type), 200mW (High sensitive type)
100mA, 5V DC
Insulation resistance (Initial)
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
4,000 Vrms for 1 min. (Detection current: 10 mA)
Between open contacts
Between contact and coil
Breakdown voltage
(Initial)
Max. 55°C 131°F, Max. 45°C 113°F (200mW type) (By resistive method, nominal coil voltage
applied to the coil; contact carrying current: 16A, at 20°C 68°F)
Electrical
characteristics
Temperature rise (coil)
Surge breakdown voltage*2
(Between contact and coil) (Initial)
10,000 V
Operate time (at nominal voltage) (at 20°C 68°F)
Release time (at nominal voltage) (at 20°C 68°F)
Max. 20 ms (excluding contact bounce time.)
Max. 20 ms, Max. 25 ms (200mW type) (excluding contact bounce time) (With diode)
200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 1.5 mm
Functional
Shock resistance
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical (at 180 times/min.)
Electrical (at 20 times/min.)
Min. 2×106
Min. 105 (at resistive load)
Expected life
Ambient temperature: –40°C to +85°C –40°F to +185°F;
Conditions for operation, transport and storage*3
Max. operating speed
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
20 times/min. (at nominal switching capacity)
Approx. 17 g .60 oz, Approx. 15 g .53 oz (PCB type)
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of 1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
1-1. Coil temperature rise (400mW type)
1-2. Coil temperature rise (200mW type)
2. Life curve
Sample: ALE14B12, 6 pcs.
Sample: ALE74B12, 6 pcs.
Point measured: coil inside
Point measured: coil inside
Ambient temperature: 25°C 77°F, 85°C 185°F
Ambient temperature: 23.7°C 74.66°F, 85°C 185°F
60
30
100
16A
25°C
85°C
23.7°C
85°C
16A
12A
0A
50
25
16A
0A
16A
250V AC resistive load
12A
0A
40
30
20
10
0
20
0A
15
10
5
10
0
1
0
2
4
6
8
10 12 14 16
0
80
100
Coil applied voltage, %V
145
0
80
100
Coil applied voltage, %V
145
Contact current, A
ASCTB194E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/