ORDERING INFORMATION
MECHANICAL DIMENSIONS
PART NUMBER CODING INTERPRETATION
5
Inches
1
2
3
4
6
7
8
Position
1
Product
AK
= Accutek Memory
2
Type
4 = Dynamic RAM
5 = CMOS Dynamic RAM
6 = Static RAM
3
Organization/Word Width
1 = by 1 16 = by 16
4 = by 4 32 = by 32
8 = by 8 36 = by 36
9 = by 9
4
Size/Bits Depth
64 = 64K
4096 = 4 MEG
8192 = 8 MEG
1024 = 1 MEG 16384 = 16 MEG
256 = 256K
5
Package Type
G = Single In-Line Package (SIP)
S = Single In-Line Module (SIM)
D = Dual In-Line Package (DIP)
W = .050 inch Pitch Edge Connect
Z = Zig-Zag In-Line Package (ZIP)
6
Special Designation
P = Page Mode
N = Nibble Mode
K = Static Column Mode
W = Write Per Bit Mode
V = Video Ram
7
Separator
-
= Commercial 00C to +700C
M = Military Equivalent Screened
(-550C to +1250C)
I
= Industrial Temperature Tested
(-450C to +850C)
X = Burned In
0.100
TYP
8
Speed (first two significant digits)
SRAMS
DRAMS
50
60
70
80
=
=
=
=
50 nS
60 nS
70 nS
80 nS
8
10
12
15
=
=
=
=
8 nS
10 nS
12 nS
15 nS
The numbers and coding on this page do not include all variations
available but are show as examples of the most widely used variations.
Contact Accutek if other information is required.
EXAMPLES:
AK48256SP-10
256K x 8, 100 nSEC DRAM 30 pin SIM Configuration, Page Mode
AK48256GK-80
256K x 8, 80 nSEC DRAM 30 pin SIP Configuration, Static Column Mode
ACCUTEK MICROCIRCUIT CORPORATION
BUSINESS CENTER at NEWBURYPORT
2 NEW PASTURE ROAD, SUITE 1
NEWBURYPORT, MA 01950-4054
VOICE: 978-465-6200 FAX: 978-462-3396
Accutek reserves the right to make changes in specifications at any
time and without notice. Accutek does not assume any responsibil-
ity for the use of any circuitry described; no circuit patent licenses
are implied. Preliminary data sheets contain minimum and maxi-
mum limits based upon design objectives, which are subject to
change upon full characterization over the specific operating condi-
tions.
Email: sales@accutekmicro.com
Internet: www.accutekmicro.com