AIC811/AIC812
Reset Circuits with Manual Reset Input
ꢀFEATURES
ꢀDESCRIPTION
ꢁ Ultra Low Supply Current 1µA(typ.)
ꢁ Guaranteed Reset Valid to Vcc=0.9V
AIC811/AIC812 are low-power microprocessor (µP)
supervisory circuits used to monitor power supplies in
ꢁ Available in two Output Types: Push-Pull Active
Low (AIC811), Push-Pull Active High (AIC812)
ꢁ 140ms Min. Power-On Reset Pulse Width
ꢁ Internally Fixed Threshold 2.3V, 2.6V, 2.9V,
3.1V, 4.0V, 4.4V, and 4.6V
µP and digital systems. They provide applications with
benefits of circuit reliability and low cost by eliminating
external components. AIC811/AIC812 also offer a
manual reset input.
ꢁ Tight Voltage Threshold Tolerance: 1.5%
ꢁ Low profile Package: SOT-23-5
These devices perform as valid singles in applications
with Vcc ranging from 6.0V down to 0.9V. The reset
signal lasts for a minimum period of 140ms whenever
VCC supply voltage falls below preset threshold. Both
AIC811 and AIC812 were designed with a reset
comparator to help identify invalid signals, which last
less than 140ms. The only difference between them is
that they have an active-low RESET output and
ꢀAPPLICATIONS
ꢁ Notebook Computers
ꢁ Digital Still Cameras
ꢁ PDAs
ꢁ Critical Microprocessor Monitoring
active-high RESET output, respectively.
Low supply current (1µA) makes AIC811/AIC812 ideal
for portable equipment. The devices are available in
SOT-23-5 package.
ꢀTYPICAL APPLICATION CIRCUIT
V
CC
VCC
VCC
AIC811
(AIC812)
µP
RESET
INPUT
RESET
(RESET)
MR
GND
GND
Pushbutton
Switch
Analog Integrations Corporation
Si-Soft Research Center
3A1, No.1, Li-Hsin Rd. I, Science Park, Hsinchu 300, Taiwan, R.O.C.
DS-811P-03 010405
TEL: 886-3-5772500 FAX: 886-3-5772510 www.analog.com.tw
1