AIC809/AIC810
3-Pin Microprocessor Reset Circuits
ꢀFEATURES
ꢀDESCRIPTION
ꢁ Ultra Low Supply Current 1µA(typ.)
ꢁ Guaranteed Reset Valid to Vcc=0.9V
AIC809/AIC810 are low-power microprocessor (µP)
supervisory circuits used to monitor power supplies in
ꢁ Available in Three Output Type: Open-Drain
Active Low (AIC809N), Push-Pull Active Low
(AIC809), Push-Pull Active High (AIC810)
ꢁ 140ms Min. Power-On Reset Pulse Width
ꢁ Internally Fixed Threshold 2.3V, 2.6V, 2.9V,
3.1V, 4.0V, 4.4V, 4.6V
µP and digital systems. They provide applications with
benefits of circuit reliability and low cost by eliminating
external components.
These devices perform as valid singles in applications
with Vcc ranging from 6.0V down to 0.9V. The reset
signal lasts for a minimum period of 140ms whenever
VCC supply voltage falls below preset threshold. Both
AIC809 and AIC810 were designed with a reset
comparator to help identify invalid signals, which last
less than 140ms. The only difference between them is
that they have an active-low RESET output and
ꢁ Tight Voltage Threshold Tolerance: 1.5%
ꢁ Tiny Package in SOT-23
ꢀAPPLICATIONS
ꢁ Notebook Computers
ꢁ Digital Still Cameras
ꢁ PDAs
ꢁ Critical Microprocessor Monitoring
active-high RESET output, respectively.
Low supply current (1µA) makes AIC809/AIC810 ideal
for portable equipment. The devices are available in
SOT-23 package.
ꢀTYPICAL APPLICATION CIRCUIT
V
CC
VCC
VCC
AIC809
(AIC810)
µP
RESET
INPUT
RESET
(RESET)
GND
GND
Push-Pull Output
Analog Integrations Corporation
Si-Soft Research Center
DS-809P-02 010405
3A1, No.1, Li-Hsin Rd. I, Science Park, Hsinchu 300, Taiwan, R.O.C.
TEL: 886-3-5772500
FAX: 886-3-5772510
www.analog.com.tw
1