AH3763Q
Absolute Maximum Ratings (Notes 5 & 6) (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
Characteristic
Value
32
Unit
V
Supply Voltage (Note 6)
Reverse Supply Voltage (Note 6)
Output Off Voltage (Note 6)
Continuous Output Current
-32
32
V
VDDR
V
VOUT_MAX
IOUT
IOUT_R
B
60
mA
Reverse Output Current
Magnetic Flux Density
-50
mA
Unlimited
SIP-3
550
Package Power Dissipation
mW
PD
SC59 and SOT23
230
Ts
Storage Temperature Range
-65 to +165
°C
°C
kV
V
Maximum Junction Temperature
+150
8
TJ
ESD HBM
ESD MM
ESD CDM
Electros Static Discharge Withstand - Human Body Model (HMB)
Electros Static Discharge Withstand - Machine Model (MM)
800
2
Electros Static Discharge Withstand - Charged Device Model (CDM)
kV
Notes:
5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
6. The absolute maximum V
of 32V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to
DD
operate the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions (@TA = -40°C to +150°C, unless otherwise specified.)
Symbol
VDD
Parameter
Supply Voltage
Operating Temperature Range
Conditions
Rating
3.0 to 28
Unit
V
Operating
Operating
-40 to +150
°C
TA
Electrical Characteristics (Notes 7 & 8) (@TA = -40°C to +150°C, VDD = 3V to 28V, unless otherwise specified.)
Symbol
Parameter
Output ON Voltage
Conditions
IOUT = 20mA, B > Bop
Min
Typ
Max
Unit
VOUT_ON
-
0.2
0.4
V
Output Leakage Current
(when output is off)
ILKG
IDD
-
<0.1
10
µA
VOUT = 28V, B < Brp, Output off
-
-
-
-
-
-
-
-
3
-
3.5
mA
mA
µA
µA
µA
µA
µs
Output open, TA = +25°C
Output open, TA = -40 to +150°C
VDD = -18V, TA = +25°C
VDD = -18V, TA = -40 to +150°C
VDD = -28V, TA = +25°C
VDD = -28V, TA = -40 to +150°C
VDD >= 3V, B > Bop (Note 7)
VDD >= 3V
Supply Current
4
0.6
0.6
1.6
1.6
10
-
1,500
-
IDD_R
Reverse Supply Current
2,500
Device Power-On Time (start-up time)
tP_ON
fc
Chopping Frequency
Response Time Delay
(time from magnetic threshold reached (Note 9)
to the start of the output rise or fall)
Output Rising Time
(external pull-up resistor RL and load
capacitance dependent)
Output Falling Time
800
-
-
kHz
-
-
-
3.75
0.2
µs
µs
µs
td
tr
tf
1
1
RL = 1kΩ, CL = 20pF
(Internal switch resistance and load
capacitance dependent)
0.1
RL = 1kΩ, CL = 20pF
Output Current Limit
Zener Clamp Voltage
30
28
-
-
55
-
mA
V
IOCL
VZ
B > Bop, (Note 10 )
IDD = 5mA
Notes:
7. When power is initially turned on, VDD must be within its correct operating range (3.0V to 28V) to guarantee the output sampling. The output state is valid
after the start-up time of 10us typical from the operating voltage reaching 3V.
8. Typical values are defined at T = +25C, V
= 12V. Maximum and minimum values over the operating temperature range is not tested in production
DD
A
but guaranteed by design, process control and characterization.
9. Guaranteed by design, process control and characterization. Not tested in production.
10. The device will limit the output current I
OUT
to current limit of I
OCL.
3 of 15
www.diodes.com
July 2015
© Diodes Incorporated
AH3763Q
Document number: DS38072 Rev. 2 - 2