12-Bit RDC
with Reference Oscillator
AD2S1205
FUNCTIONAL BLOCK DIAGRAM
FEATURES
CRYSTAL
REFERENCE
Complete monolithic resolver-to-digital converter (RDC)
Parallel and serial 12-bit data ports
System fault detection
PINS
AD2S1205
INTERNAL
CLOCK
GENERATOR
REFERENCE
OSCILLATOR
(DAC)
VOLTAGE
REFERENCE
EXCITATION
OUTPUTS
11 arc minutes of accuracy
Input signal range: 3.15 V p-p 27ꢀ
Absolute position and velocity outputs
1250 rps maximum tracking rate, 12-bit resolution
Incremental encoder emulation (1024 pulses/rev)
Programmable sinusoidal oscillator on board
Single-supply operation (5.00 V 5ꢀ)
−40°C to +125°C temperature rating
44-lead LQFP
SYNTHETIC
REFERENCE
INPUTS
FROM
FAULT
DETECTION
OUTPUTS
ADC
ADC
FAULT
TYPE II TRACKING LOOP
POSITION REGISTER
DETECTION
RESOLVER
VELOCITY REGISTER
ENCODER
EMULATION
OUTPUTS
ENCODER
EMULATION
MULTIPLEXER
4 kV ESD protection
Qualified for automotive applications
DATA BUS OUTPUT
APPLICATIONS
DATA I/O
RESET
Automotive motion sensing and control
Hybrid-electric vehicles
Figure 1.
Electric power steering
Integrated starter generator/alternator
Industrial motor control
Process control
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The AD2S1205 is a complete 12-bit resolution tracking
resolver-to-digital converter that contains an on-board
programmable sinusoidal oscillator providing sine wave
excitation for resolvers.
1. Ratiometric Tracking Conversion. The Type II tracking
loop provides continuous output position data without
conversion delay. It also provides noise immunity and
tolerance of harmonic distortion on the reference and
input signals.
The converter accepts 3.15 V p-p 2ꢀ7 input signals on the Sin
and Cos inputs. A Type II tracking loop is employed to track the
inputs and convert the input Sin and Cos information into a digital
representation of the input angle and velocity. The maximum
tracking rate is a function of the external clock frequency. The
performance of the AD2S105 is specified across a frequency
range of 8.192 MHz 257, allowing a maximum tracking rate
of 1250 rps.
2. System Fault Detection. A fault detection circuit can sense
loss of resolver signals, out-of-range input signals, input
signal mismatch, or loss of position tracking.
3. Input Signal Range. The Sin and Cos inputs can accept
differential input voltages of 3.15 V p-p 2ꢀ7.
4. Programmable Excitation Frequency. Excitation frequency
is easily programmable to 10 kHz, 12 kHz, 15 kHz, or 20 kHz
by using the frequency select pins (the FS1 and FS2 pins).
5. Triple Format Position Data. Absolute 12-bit angular position
data is accessed via either a 12-bit parallel port or a 3-wire
serial interface. Incremental encoder emulation is in standard
A-quad-B format with direction output available.
6. Digital Velocity Output. 12-bit signed digital velocity accessed
via either a 12-bit parallel port or a 3-wire serial interface.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2007–2010 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
英特尔震撼发布：128核心256线程的至强6性能核处理器
SK海力士量产12层HBM3E，容量高达36GB
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
