ADuC841/ADuC842/ADuC843
ABSOLUTE MAXIMUM RATINGS
Table 2. T
A
= 25°C, unless otherwise noted
Parameter
Rating
AVDD to DVDD
–0.3 V to +0.3 V
AGND to DGND
–0.3 V to +0.3 V
DVDD to DGND, AVDD to AGND
Digital Input Voltage to DGND
Digital Output Voltage to DGND
VREF to AGND
–0.3 V to +7 V
–0.3 V to DVDD + 0.3 V
–0.3 V to DVDD + 0.3 V
–0.3 V to AVDD + 0.3 V
–0.3 V to AVDD + 0.3 V
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Analog Inputs to AGND
Operating Temperature Range,
Industrial
ADuC841BS,ADuC842BS,ADuC843BS
ADuC841BCP, ADuC842BCP,
ADuC843BCP
–40°C to +85°C
Storage Temperature Range
–65°C to +150°C
150°C
Junction Temperature
θJA Thermal Impedance (ADuC84xBS)
θJA Thermal Impedance (ADuC84xBCP)
90°C/W
52°C/W
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
215°C
220°C
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
12-BIT
VOLTAGE
OUTPUT DAC
ADuC841/ADuC842/ADuC843
DAC0
DAC1
12-BIT
VOLTAGE
OUTPUT DAC
ADC
CONTROL
AND
DAC
CONTROL
ADC0
12-BIT
ADC
T/H
ADC1
...
CALIBRATION
16-BIT
Σ-∆ DAC
MUX
16-BIT
Σ-∆ DAC
...
PWM0
PWM1
PWM
ADC6
MUX
CONTROL
16-BIT
PWM
ADC7
62 kBYTES PROGRAM
FLASH/EE INCLUDING
USER DOWNLOAD
MODE
16-BIT
PWM
TEMP
SENSOR
256 BYTES USER
RAM
T0
T1
16-BIT
COUNTER
TIMERS
4 kBYTES DATA
FLASH/EE
BAND GAP
8052
WATCHDOG
TIMER
REFERENCE
T2
2 kBYTES USER XRAM
MCU
CORE
T2EX
POWER SUPPLY
MONITOR
BUF
2 × DATA POINTERS
11-BIT STACK POINTER
INT0
INT1
C
REF
DOWNLOADER
DEBUGGER
TIME INTERVAL
COUNTER
(WAKE-UP CCT)
SYNCHRONOUS
ASYNCHRONOUS
SERIAL PORT
(UART)
PLL
UART
TIMER
SERIAL INTERFACE
POR
2
(I C AND SPI )
OSC
Figure 2. ADuC Block Diagram (Shaded Areas are Features Not Present on the ADuC812),
No DACs on ADuC843, PLL on ADuC842/ADuC843 Only.
Rev. 0 | Page 8 of 88