Datasheet > ADT6780

ADT6780

更新时间： 2022-10-09 10:37:32

品牌	Logo	应用领域
ADTECH		驱动器
页数	文件大小	规格书
13页	490K
描述
Thermally enhanced Low VFB Step-Down LED Driver

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

ADT6780 数据手册

Thermally enhanced Low V_FBStep-Down LED Driver

APPLICATION INFORMATION (continued)

ADT6780

Input Capacitor

The input capacitor is used to filter out discontinuous, pulsed input current and to maintain input voltage

stable. Therefore input capacitor should be able to supply the AC current to the step-down converter. Its

input ripple voltage can be estimated by:

⎛

⎞

I_OUT

V_OUT

⎜

⎟

ΔV =

× 1−

⎜

⎝

F ×C_INV_IN

⎠

where, CIN is input capacitor value.

The voltage rating of input capacitor must be greater than the maximum input voltage plus ripple voltage.

Since the input capacitor absorbs the input switching current, it requires an proper ripple current rating. The

RMS current in the input capacitor can be approximated by:

⎛

⎞

V_OUT

V_IN

V_OUT

⎜

⎟

I_{CIN_RMS}= I_OUT

× 1−

⎜

⎝

⎠

The worst-case condition occurs at V_IN=2×V_OUT(50% duty condition), and its worst RMS current is

approximately half of the I_OUT. For reliable operation and best performance, the input capacitors must have

current rating higher than I_{CIN_RMS}at worst operating conditions. Ceramic capacitors are preferred for input

capacitors because of their low ESR and high current rating. When selecting ceramic capacitors, X5R or

X7R type dielectric ceramic capacitors should be used for their better temperature and voltage

characteristics. For most applications, a 10㎌ ceramic capacitor is sufficient.

Output Capacitor

The output capacitor is required to maintain the DC output voltage. In a step-down converter circuit, output

ripple voltage is determined by the inductor value, switching frequency, output capacitor value and ESR.

That is:

⎛

⎞

⎜

⎟

ΔV_OUT= ΔI_L× ESR +

⎜

⎝

where,

8×F ×C_O

⎠

C_Ois output capacitor value,

ESR is the equivalent series resistance of the output capacitor.

Low ESR capacitors are preferred to keep the output voltage ripple low. When low ESR ceramic capacitor is

used as output capacitor, its ESR value can be waived. So, the impedance at the switching frequency is

dominated by the capacitance. Therefore the output voltage ripple is:

⎛

⎞

⎜

⎟

ΔV_OUT= ΔI_L×

8×F ×C_O

⎝

⎠

On the other hand, in the case of tantalum or electrolytic capacitors, the ESR dominates the impedance at the

switching frequency. In this case, the output voltage ripple is:

ΔV_OUT= ΔI_L×

(

ESR

)

In a step-down converter, output capacitor current is continuous. Usually, the ripple current rating of the

output capacitor is not concerned because of its low ripple current. For most applications, a 10㎌ ceramic

capacitor is sufficient.

* This specifications are subject to be changed without notice

http://www.ad-tech.co.kr

Jul. 12. 2012 / Preliminary

9/13

1...6 7 8910 11 12 13

下载PDF

与ADT6780相关器件

型号	品牌	描述	获取价格	数据表
ADT6780_CN	ADTECH	Thermally enhanced Low VFB Step-Down LED Driver	获取价格
ADT7.1-ED7746	MINI	RF Transformer, 0.5MHz Min, 350MHz Max	获取价格
ADT7.1-ED7746+	MINI	RF Transformer, 0.5MHz Min, 350MHz Max	获取价格
ADT70	ADI	PRTD Conditioning Circuit and Temperature Controller	获取价格
ADT70*	ETC	PRTD Conditioning Circuit and Temperature Controller	获取价格
ADT70FR	ADI	Analog Temperature Sensor, ANALOG TEMP SENSOR-VOLTAGE, 2.5V, RECTANGULAR, THROUGH HOLE MOU	获取价格