ADS-943
14-Bit, 3MHz, Low-Distortion, Sampling A/D Converters
PRODUCT OVERVIEW
The low-cost ADS-943 is a 14-bit, 3MHz
sampling A/D converter optimized to meet the
demanding dynamic-range and sampling-rate
requirements of contemporary digital telecommu-
nications applications. The ADS-943's outstanding
dynamic performance is evidenced by a peak har-
Digital input and output levels are TTL. The unit
is edge-triggered, requiring only the rising edge
of a start convert pulse to initiate a conversion.
The device is offered with a bipolar input range
of ±25. Models are available in commercial (0 to
+70°C), industrial (–40 to +100°C), or HI-REL (–±±
monic specification of –83dB and a signal-to-noise to +12±°C) operating temperature ranges. A pro-
ratio (SNR) of 79dB. Additionally, the ADS-943
easily achieves the 2.2MHz minimum sampling
rate required by digital receivers in certain ADSL,
HDSL and ATM applications. The ADS-943 also
addresses size and power constraints normally
associated with these types of applications. This
device requires just ±±5 supplies, dissipates 1.7
Watts, and is packaged in a very small 24-pin DDIP.
Although optimized for frequency-domain
applications, the ADS-943's DNL and noise speci-
fications are also outstanding, thereby making
it an equally impressive device for time-domain
applications (graphic and medical imaging, pro-
cess control, etc.). In fact, the ADS-943 guarantees
no missing codes to the 14-bit level over the full
HI-REL operating temperature range.
prietary, auto-calibrating, error-correcting circuit
allows the device to achieve specified performance
over the full HI-REL temperature range.
FEATURES
INPUT/OUTPUT CONNECTIONS
14-bit resolution
PIN FUNCTION
PIN FUNCTION
3MHz minimum sampling rate
1
BIT1 (MSB)
BIT 2
24
23
22
21
20
19
18
17
16
15
14
13
ANALOG GROUND
2
OFFSET ADJUST
+5V ANALOG SUPPLY
ANALOG INPUT
–5V SUPPLY
Ideal for both frequency and time-domain
applications
3
BIT 3
4
BIT 4
Excellent peak harmonics, –83dB
Excellent signal-to-noise ratio, 79dB
5
BIT 5
6
BIT 6
ANALOG GROUND
START CONVERT
EOC
7
BIT 7
No missing codes over full HI-REL temperature
range
8
BIT 8
The functionally complete ADS-943 contains a
fast-settling sample-hold amplifier, a subranging
(two-pass) A/D converter, an internal reference,
timing/control logic, and error-correction circuitry.
9
BIT 9
BIT 14 (LSB)
±±5 supplies, 1.7 Watts
Small, 24-pin ceramic DDIP or SMT
Low cost
10
11
12
BIT 10
BIT 11
BIT 12
BIT 13
DIGITAL GROUND
+5V DIGITAL SUPPLY
BLOCK DIAGRAM
OFFSET ADJUST 23
BUFFER
16 BIT 14 (LSB)
15 BIT 13
–
+
ANALOG INPUT 21
S/H
FLASH
ADC
1
12 BIT 12
11 BIT 11
10 BIT 10
POWER AND GROUNDING
9
8
7
6
5
4
3
2
1
BIT 9
REF
BIT 8
+5V ANALOG SUPPLY
+5V DIGITAL SUPPLY
DIGITAL GROUND
–5V SUPPLY
22
13
DAC
BIT 7
3
BIT 6
14
BIT 5
20
BIT 4
FLASH
ADC
2
BIT 3
ANALOG GROUND
19, 24
BIT 2
AMP
BIT 1 (MSB)
START CONVERT 18
EOC 17
TIMING AND
CONTROL LOGIC
Figure 1. ADS-943 Functional Block Diagram
DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 USA
•
Tel: (508) 339-3000
•
www.datel.com
•
e-mail: help@datel.com
21 Aug 2015 MDA_ADS-943.C02 Page 1 of 9