Logic Controlled, High-Side Power Switch
ADP190
FEATURES
TYPICAL APPLICATIONS CIRCUIT
Low RDSON of 105 mΩ @ 1.8 V
ADP190
VIN
VOUT
Low input voltage range: 1.2 V to 3.6 V
500 mA continuous operating current
Built-in level shift for control logic that can be operated by
1.2 V logic
Low 2 μA (maximum) ground current
Ultralow shutdown current: <1 μA
GND
–
LOAD
LEVEL
SHIFTER
EN
Ultrasmall 0.8 mm × 0.8 mm, 4-ball, 0.4 mm pitch WLCSP
Figure 1.
APPLICATIONS
Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP190 is a high-side load switch designed for operation
from 1.2 V to 3.6 V. This load switch provides power domain
isolation for extended power battery life. The device contains a
low on-resistance P-channel MOSFET that supports more than
500 mA of continuous current and minimizes power loss. The
low 2 μA (maximum) of ground current and ultralow shutdown
current make the ADP190 ideal for battery-operated portable
equipment. The built-in level shifter for enable logic makes the
ADP190 compatible with modern processors and GPIO
controllers.
Beyond operating performance, the ADP190 occupies minimal
printed circuit board (PCB) space with an area less than 0.64 mm2
and a height of 0.60 mm. It is available in an ultrasmall 0.8 mm ×
0.8 mm, 4-ball, 0.4 mm pitch WLCSP.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2009 Analog Devices, Inc. All rights reserved.