5 V, 3 A Logic Controlled
High-Side Power Switch
ADP197
Data Sheet
FEATURES
TYPICAL APPLICATIONS CIRCUIT
VIN
+
–
VOUT
Low RDSON of 12 mΩ
Low input voltage range: 1.8 V to 5.5 V
Quick output discharge (QOD) circuit (ADP197-02)
3 A continuous operating current at 70°C
1.2 V logic-compatible enable input
GND
ON
CHARGE PUMP
LOAD
AND SLEW RATE
EN
OFF
CONTROL
Low 18 μA quiescent current, VIN < 3 V
Low 31 μA quiescent current, VIN = 4.2 V
Overtemperature protection
OVERTEMPERATURE
ADP197-02
PROTECTION
ONLY
Ultralow shutdown current: <1 μA
ADP197
Ultrasmall 1.0 mm × 1.5 mm, 0.5 mm pitch, 6-ball WLCSP
Tiny 2.0 mm × 2.0 mm × 0.55 mm, 0.65 mm pitch, 6-lead LFCSP
Figure 1.
APPLICATIONS
Mobile phones
Digital cameras and audio devices
Portable and battery-powered equipment
GENERAL DESCRIPTION
The ADP197 is a high-side load switch designed for operation
between 1.8 V and 5.5 V. This load switch provides power domain
isolation, which helps extend battery operation. The device
contains a low on-resistance, N-channel MOSFET that supports
more than 3 A of continuous current and minimizes power loss.
The low 18 μA quiescent current and ultralow shutdown current
make the ADP197 ideal for battery-operated portable equipment.
The built-in level shifter for enable logic makes the ADP197
compatible with many processors and GPIO controllers.
The ADP197-02 incorporates an internal quick output
discharge (QOD) circuit to discharge the output capacitance
when the ADP197-02 output is disabled
In addition to operating performance, the ADP197 WLCSP
package occupies minimal printed circuit board (PCB) space
with an area of less than 1.5 mm2 and a height of 0.60 mm.
The ADP197 is available in an ultrasmall 1.0 mm × 1.5 mm,
0.5 mm pitch, 6-ball WLCSP and a 2.0 mm × 2.0 mm ×
0.55 mm, 0.65 mm pitch, 6-lead LFCSP.
Overtemperature protection circuitry activates if the junction
temperature exceeds 125°C, thereby protecting itself and
downstream circuits from potential damage.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com