ADM8845
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter
Rating
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Supply Voltage, VCC
ISET
CTRL1, CTRL2
VOUT Shorted1
–0.3 V to +6.0 V
–0.3 V to +2.0 V
–0.3 V to +6.0 V
Indefinite
Feedback pins FB1 to FB6
Operating Temperature Range
Six LEDs Enabled with 30 mA/LED2
Six LEDs Enabled with 20 mA/LED2
–0.3 V to +6.0 V
–40°C to +65°C
–40°C to +85°C
180 mA
–65°C to +125°C
2 mW
THERMAL CHARACTERISTICS
16-Lead LFCSP Package:
3
VOUT
Storage Temperature Range
Power Dissipation
ESD Class
θJA = 50°C/W
1
1 Short through LED.
2 LED current should be derated above TA > 65°C, refer to Figure 21.
3 Based on long-term current density limitations.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 4 of 20