ADM1070ARTZ-REEL

更新时间： 2024-01-02 07:15:45

品牌	Logo	应用领域
亚德诺 - ADI		控制器
页数	文件大小	规格书
16页	337K
描述
暂无描述

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

ADM1070ARTZ-REEL 数据手册

浏览型号ADM1070ARTZ-REEL的Datasheet PDF文件第10页

浏览型号ADM1070ARTZ-REEL的Datasheet PDF文件第11页

ADM1070

FUNCTIONAL DESCRIPTION

HOT CIRCUIT INSERTION

Inserting circuit boards into a live –48 V backplane can cause large

transient currents to be drawn as the board capacitance charges up.

These transient currents can cause glitches on the system power

supply and can permanently damage components on the board.

Figure 2 shows how a plug-in module containing the ADM1070

makes connection to the backplane supply. When the board is

inserted, the –48 V and 0 V lines connect. This powers up the

device with the voltage on V_INexceeding V_LKO

When the voltage at the UV/OV Pin exceeds undervoltage rising

threshold (V_UVR) of 0.91 V, it is now inside the operating volt-

age window. It must stay inside this window for the duration of

the power-on reset delay time, t_POR, which is dependent on the

value of C_T.

The ADM1070 is designed to control the manner in which a

board’s supply voltage is applied so that harmful transient currents

do not occur and the board can be safely inserted or removed from

a live backplane. Undervoltage, overvoltage, and overcurrent pro-

tection are other features of the part. The ADM1070 ensures that

the input voltage is stable and within tolerance before being applied

to the dc-to-dc converter, which generates the low voltage levels

required to power the on-board logic. One such converter is the

Artesyn EXQ50. Go to www.artesyn.com for more information.

When the device detects that the supply voltage is valid, it ramps

up the gate voltage until the FET turns on and the load current

increases. The ADM1070 monitors the level of the current flowing

through the FET by sensing the voltage across the external

sense resistor, R_SENSE. When the sense voltage reaches 100 mV,

the GATE Pin is actively controlled, limiting the load current.

In this way, the maximum current permitted to flow through the

PLUG-IN BOARD

load is set by the choice of R_SENSE

ARTESYN

EXQ50

If a change in the level of the supply voltage causes UV/OV to

fall below the undervoltage falling threshold of V_UVF, or rise

above the overvoltage rising threshold of V_OVR, then the gate

drive will be disabled.

–

OUT

LIVE

BACKPLANE

OUT

ADM1070

LOAD

BOARD REMOVAL

TRIM

If the board is removed from a card cage, the voltage at the

UV/OV pin falls to zero (i.e., outside operating range) and the

gate drive is deasserted, turning off the FET.

–48V

V –

FET

SENSE

CONTROLLING THE CURRENT

The ADM1070 features a current limiting function that protects

against short circuits or excessive supply currents. The flow of

current through the load is monitored by measuring the voltage

across the sense resistor, which is connected between the SENSE

and V_EEPins. There are three different types of protection offered:

Figure 1. Topology

INITIAL STARTUP

The ADM1070 hot swap controller normally resides on a remov-

able circuit board and controls the manner in which power is

applied to the board upon connection. This is achieved using a

FET, Q1, in the power path. By controlling the gate voltage of

the FET, the surge of current to charge load capacitance can be

limited to a safe value when the board makes connection. Note

that the ADM1070 can also reside on the backplane itself, and

perform the same function from there.

1. If the voltage across the sense resistor exceeds the circuit

breaker limit voltage of 88 mV (rising) for the current limit

on time (t_LIMITON), then a current fault has occurred and the

PWM cycle begins. The FET current is linearly controlled at

a maximum of 100 mV/R_SENSE(via the gate drive) during

t_LIMITON(see next section). The gate is then disabled for the

duration t_OFF. This PWM ratio, which will always be 3%, is

given by t_ON/t_OFF

OUT

LOAD

16k⍀

DROP

A unique feature of the ADM1070 is the limited consecutive

retry function. An internal fault counter keeps track of the

number of successive PWM cycles that occur. The fault

counter is incremented after every fault is detected. If the

ADM1070 detects seven consecutive current faults, it is appar-

ent that the fault is not a temporary one and the device

latches itself off. The fault counter is cleared if a new t_ON

timeout does not occur within 2 ϫ t_OFFof the previous

GATE

ADM1070

LIVE

BACKPLANE

UV/OV

SENSE

TMER

_LIMITONtimeout.

–48V

Figure 2. Circuit Board Connection

REV. 0

–9–

1...6 7 8910 11 12...16

中文翻译

下载PDF

ADM1070ARTZ-REEL 替代型号

型号	品牌	替代类型	描述	数据表
ADM1070ART-REEL7	ADI	完全替代	- 48 V Hot Swap Controller in SOT-23 with Linear Current Limiting
ADM1070ARTZ-REEL7	ADI	完全替代	- 48 V Hot Swap Controller in SOT-23 with Linear Current Limiting

与ADM1070ARTZ-REEL相关器件

型号	品牌	获取价格	描述	数据表
ADM1070ARTZ-REEL7	ROCHESTER	获取价格	1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, PLASTIC, MO-178AB, SOT-23, 6 PIN
ADM1070ARTZ-REEL7	ADI	获取价格	- 48 V Hot Swap Controller in SOT-23 with Linear Current Limiting
ADM1070EB	ADI	获取价格	ADM1070 Hot Swap Controller Evaluation Kit Documentation
ADM1072	ADI	获取价格	Dual, USB 2.0 Full/Standby Power Controller with Supply Steering
ADM1072ARQ	ADI	获取价格	Dual, USB 2.0 Full/Standby Power Controller with Supply Steering
ADM1072ARQ-REEL	ADI	获取价格	暂无描述
ADM1072ARQ-REEL7	ADI	获取价格	IC 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16, QSOP-16, Power Management Circuit
ADM1073	ADI	获取价格	Full-Feature −48 V Hot Swap Controller
ADM1073ARU	ADI	获取价格	Full-Feature −48 V Hot Swap Controller
ADM1073ARU-REEL	ADI	获取价格	Full-Feature −48 V Hot Swap Controller

与ADM1070ARTZ-REEL相关文章

压敏电阻器在直流电路中的过压保护应用探讨
2024-06-07

1
电感耐压值及其与电感大小的关系
2024-06-07

3
CNY17F光耦合器：特性、应用、封装、引脚功能及替换型号解析
2024-06-07

3
DS1307资料解析：特性、引脚说明、替代推荐
2024-06-07

1

产品中心

服务支持

精选活动

关于我们

帮助中心

ADM1070ARTZ-REEL

ADM1070ARTZ-REEL 数据手册

ADM1070ARTZ-REEL 替代型号

与ADM1070ARTZ-REEL相关器件

与ADM1070ARTZ-REEL相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ADM1070ARTZ-REEL

ADM1070ARTZ-REEL 数据手册

ADM1070ARTZ-REEL 替代型号

与ADM1070ARTZ-REEL相关器件

与ADM1070ARTZ-REEL相关文章

您还可以找

您在本页遇到什么问题？