ADL5501
Parameter
Condition
Min
Typ
Max
Unit
OUTPUT OFFSET
No signal at RFIN
50
150
mV
ENABLE INTERFACE
Pin ENBL
Logic Level to Enable Power, High Condition
Input Current when High
Logic Level to Disable Power, Low Condition
Power-Up Response Time5
2.7 V ≤ VS ≤ 5.5 V, −40°C < TA < +85°C
2.7 V at ENBL, –40°C ≤ TA ≤ +85°C
2.7 V ≤ VS ≤ 5.5 V, −40°C < TA < +85°C
CFLTR = COUT = open, 0 dBm at RFIN
CFLTR = 1 nF, COUT = open, 0 dBm at RFIN
CFLTR = open, COUT = 100 nF, 0 dBm at RFIN
1.8
VPOS
0.1
+0.5
V
μA
V
μs
μs
μs
0.05
–0.5
6
21
28
POWER SUPPLIES
Operating Range
Quiescent Current
Total Supply Current When Disabled
−40°C < TA < +85°C
2.7
5.5
<5
V
mA
μA
No signal at RFIN6
1.1
0.1
No signal at RFIN, ENBL input low
1 The available output swing and, therefore, the dynamic range are altered by the supply voltage; see Figure 8.
2 Error referred to best-fit line at 25°C.
3 Calculated using linear regression.
4 Error referred to delta from 25°C response; see Figure 13, Figure 14, Figure 15, Figure 19, Figure 20, and Figure 21.
5 The response time is measured from 10% to 90% of settling level; see Figure 30.
6 Supply current is input-level dependent; see Figure 6.
Rev. B | Page 8 of 28