ADG333A
ABSO LUTE MAXIMUM RATINGS1
(T A = +25°C unless otherwise noted)
SOIC Package
JA, T hermal Impedance . . . . . . . . . . . . . . . . . . . . . 74°C/W
θ
Lead T emperature, Soldering
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +44 V
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +30 V
VSS to GND . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –30 V
Analog, Digital Inputs2 . . . . . . . . . . . . VSS – 2 V to VDD + 2 V
. . . . . . . . . . . . . . . . . . . . . . or 20 mA, Whichever Occurs First
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 20 mA
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA
(Pulsed at 1 ms, 10% Duty Cycle Max)
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . +215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
SSOP Package
θ
JA, T hermal Impedance . . . . . . . . . . . . . . . . . . . . 130°C/W
Lead T emperature, Soldering
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . +215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
Operating T emperature Range
NOT ES
1Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. T his is a stress rating only and functional
operation of the device at these or any other conditions above those listed in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Only one absolute maximum rating may be applied at any one time.
2Overvoltages at IN, S or D will be clamped by internal diodes. Current should be
limited to the maximum ratings given.
Industrial (B Version) . . . . . . . . . . . . . . . . –40°C to +85°C
Storage T emperature Range . . . . . . . . . . . . –65°C to +125°C
Junction T emperature . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Plastic Package
θ
JA, T hermal Impedance . . . . . . . . . . . . . . . . . . . . 103°C/W
Lead T emperature, Soldering (10 sec) . . . . . . . . . . +260°C
CAUTIO N
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADG333A features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. T herefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
O RD ERING GUID E
Tem perature Range
Table I. Truth Table
Model
P ackage O ption*
Logic
Switch A
Switch B
ADG333ABN
ADG333ABR
ADG333ABRS
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
N-20
R-20
RS-20
0
1
OFF
ON
ON
OFF
*N = Plastic DIP, R = Small Outline IC (SOIC). RS = Shrink Small Outline
Package (SSOP).
–4–
REV. 0