ADF7012
SPECIFICATIONS
DVDD = 2.3 V – 3.6 V; AGND = DGND = 0 V; TA = TMIN to TMAX, unless otherwise noted. Operating temperature range is −40°C to +85°C.
Table 1.
Parameter
B Version
Unit
Conditions/Comments
RF OUTPUT CHARACTERISTICS
Operating Frequency
75/1000
FRF/128
MHz min/max
Hz min
VCO range adjustable using external inductor;
divide-by-2, -4, -8 options may be required
Phase Frequency Detector
MODULATION PARAMETERS
Data Rate FSK/GFSK
179.2
64
kbps
Kbps
Using 1 MHz loop bandwidth
Based on US FCC 15.247 specfications for ACP; higher
data rates are achievable depending on local regulations
For example, 10 MHz PFD – deviation min = 610 Hz
For example, 10 MHz PFD – deviation max = 311.7 kHz
Data Rate ASK/OOK
Deviation FSK/GFSK
PFD/214
511 × PFD/214
0.5
Hz min
Hz max
typ
GFSK BT
ASK Modulation Depth
OOK Feedthrough (PA Off)
25
−40
−80
dB max
dBm typ
dBm typ
FRF = Fvco
FRF = Fvco/2
POWER AMPLIFIER PARAMETERS
Max Power Setting, DVDD = 3.6 V
Max Power Setting, DVDD = 3.0 V
Max Power Setting, DVDD = 2.3 V
Max Power Setting, DVDD = 3.6 V
Max Power Setting, DVDD = 3.0 V
Max Power Setting, DVDD = 2.3 V
PA Programmability
14
dBm
dBm
dBm
dBm
dBm
dBm
dB typ
FRF = 915 MHz, PA is matched into 50 Ω
FRF = 915 MHz, PA is matched into 50 Ω
FRF = 915 MHz, PA is matched into 50 Ω
FRF = 433 MHz, PA is matched into 50 Ω
FRF = 433 MHz, PA is matched into 50 Ω
FRF = 433 MHz, PA is matched into 50 Ω
PA output = −20 dBm to +13 dBm
13.5
12.5
14.5
14
13
0.4
POWER SUPPLIES
DVDD
2.3/3.6
V min/V max
Current Comsumption
315 MHz, 0 dBm/5 dBm
433 MHz, 0 dBm/10 dBm
8/14
mA typ
mA typ
mA typ
mA typ
mA min/max
µA typ
µA typ
DVDD = 3.0 V, PA is matched into 50 Ω, IVCO = min
VCO current consumption is programmable
10/18
14/21/32
16/24/35
1/8
190
280
868 MHz, 0 dBm/10 dBm/14 dBm
915 MHz, 0 dBm/10 dBm/14 dBm
VCO Current Consumption
Crystal Oscillator Current Consumption
Regulator Current Consumption
Power-Down Current
0.1/1
µA typ/max
REFERENCE INPUT
Crystal Reference Frequency
3.4/26
3.4/26
MHz min/max
MHz min/max
ms typ
Single-Ended Reference Frequency
Crystal Power-On Time 3.4 MHz/26 MHz 1.8/2.2
Single-Ended Input Level CMOS Levels
CE to Clock Enable Valid
Refer to the LOGIC INPUTS parameter. Applied to OSC 2 –
oscillator circuit disabled.
Rev. 0 | Page 3 of 28