5秒后页面跳转
ADC104S021CIMM/NOPB PDF预览

ADC104S021CIMM/NOPB

更新时间: 2024-01-10 18:29:22
品牌 Logo 应用领域
美国国家半导体 - NSC 光电二极管转换器
页数 文件大小 规格书
20页 356K
描述
IC 4-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO10, MSOP-10, Analog to Digital Converter

ADC104S021CIMM/NOPB 技术参数

是否Rohs认证: 符合生命周期:Transferred
包装说明:TSSOP, TSSOP10,.19,20Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.2最大模拟输入电压:5.25 V
最小模拟输入电压:最长转换时间:16.25 µs
转换器类型:ADC, SUCCESSIVE APPROXIMATIONJESD-30 代码:S-PDSO-G10
JESD-609代码:e3长度:3 mm
最大线性误差 (EL):0.0293%湿度敏感等级:1
模拟输入通道数量:4位数:10
功能数量:1端子数量:10
最高工作温度:85 °C最低工作温度:-40 °C
输出位码:BINARY输出格式:SERIAL
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP10,.19,20封装形状:SQUARE
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):260
电源:3/5 V认证状态:Not Qualified
采样速率:0.2 MHz采样并保持/跟踪并保持:TRACK
座面最大高度:1.09 mm子类别:Analog to Digital Converters
标称供电电压:3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Matte Tin (Sn)端子形式:GULL WING
端子节距:0.5 mm端子位置:DUAL
处于峰值回流温度下的最长时间:40宽度:3 mm
Base Number Matches:1

ADC104S021CIMM/NOPB 数据手册

 浏览型号ADC104S021CIMM/NOPB的Datasheet PDF文件第14页浏览型号ADC104S021CIMM/NOPB的Datasheet PDF文件第15页浏览型号ADC104S021CIMM/NOPB的Datasheet PDF文件第16页浏览型号ADC104S021CIMM/NOPB的Datasheet PDF文件第17页浏览型号ADC104S021CIMM/NOPB的Datasheet PDF文件第19页浏览型号ADC104S021CIMM/NOPB的Datasheet PDF文件第20页 
put, multiply the fraction of time spent in the normal mode by  
the normal mode power consumption and add the fraction of  
time spent in shutdown mode multiplied by the shutdown  
mode power consumption. Generally, the user will put the part  
into normal mode and then put the part back into shutdown  
mode. Note that the curve of power consumption vs. through-  
put is nearly linear. This is because the power consumption  
in the shutdown mode is so small that it can be ignored for all  
practical purposes.  
Furthermore, discharging the output capacitance when the  
digital output goes from a logic high to a logic low will dump  
current into the die substrate, which is resistive. Load dis-  
charge currents will cause "ground bounce" noise in the sub-  
strate that will degrade noise performance if that current is  
large enough. The larger is the output capacitance, the more  
current flows through the die substrate and the greater is the  
noise coupled into the analog channel, degrading noise per-  
formance.  
To keep noise out of the power supply, keep the output load  
capacitance as small as practical. If the load capacitance is  
greater than 50 pF, use a 100 series resistor at the ADC  
output, located as close to the ADC output pin as practical.  
This will limit the charge and discharge current of the output  
capacitance and improve noise performance.  
7.2 Power Supply Noise Considerations  
The charging of any output load capacitance requires current  
from the power supply, VA. The current pulses required from  
the supply to charge the output capacitance will cause voltage  
variations on the supply. If these variations are large enough,  
they could degrade SNR and SINAD performance of the ADC.  
www.national.com  
18  

与ADC104S021CIMM/NOPB相关器件

型号 品牌 描述 获取价格 数据表
ADC104S021CIMMX NSC 4 Channel, 200 kSPS, 10-Bit A/D Converter

获取价格

ADC104S021CIMMX/NOPB TI 10-Bit, 200-kSPS, 4-Ch SAR ADC with single-ended inputs and serial interface 10-VSSOP -40

获取价格

ADC104S021CIMMX/NOPB NSC IC 4-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO10, MSOP-10, Analog to Dig

获取价格

ADC104S021EVAL NSC 4 Channel, 200 kSPS, 10-Bit A/D Converter

获取价格

ADC104S021QIMM/NOPB TI 汽车类、4 通道、50ksps 至 200ksps、10 位模数转换器 | DGS | 1

获取价格

ADC104S021QIMMX/NOPB TI 汽车类、4 通道、50ksps 至 200ksps、10 位模数转换器 | DGS | 1

获取价格