Datasheet > 放大器电路 > 运算放大器> AD8565AKSZ-REEL7

AD8565AKSZ-REEL7

更新时间： 2024-01-10 17:06:12

品牌	Logo	应用领域
亚德诺 - ADI		运算放大器放大器电路光电二极管 PC
页数	文件大小	规格书
16页	315K
描述
16 V Rail-to-Rail Operational Amplifiers

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

AD8565AKSZ-REEL7 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	TSSOT
包装说明：	TSSOP,	针数：	5
Reach Compliance Code：	unknown	风险等级：	5.4
Is Samacsys：	N	放大器类型：	OPERATIONAL AMPLIFIER
最大平均偏置电流 (IIB)：	0.8 µA	标称共模抑制比：	95 dB
最大输入失调电压：	10000 µV	JESD-30 代码：	R-PDSO-G5
JESD-609代码：	e4	长度：	2 mm
湿度敏感等级：	1	功能数量：	1
端子数量：	5	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	TSSOP	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	峰值回流温度（摄氏度）：	260
座面最大高度：	1.1 mm	标称压摆率：	6 V/us
子类别：	Operational Amplifier	供电电压上限：	18 V
标称供电电压 (Vsup)：	4.5 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	NICKEL PALLADIUM GOLD	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	40	标称均一增益带宽：	5000 kHz
宽度：	1.25 mm	Base Number Matches：	1

AD8565AKSZ-REEL7 数据手册

浏览型号AD8565AKSZ-REEL7的Datasheet PDF文件第11页

浏览型号AD8565AKSZ-REEL7的Datasheet PDF文件第12页

浏览型号AD8565AKSZ-REEL7的Datasheet PDF文件第13页

AD8565/AD8566/AD8567

This input current is not inherently damaging to the device as

long as it is limited to 5 mA or less. If a condition exists using

the AD856x where the input exceeds the supply more than

0.6 V, an external series resistor should be added. The size of the

resistor can be calculated by using the maximum overvoltage

divided by 5 mA. This resistance should be placed in series with

either input exposed to an overvoltage.

The power dissipated by the device can be calculated as

_DISS= (V_S− V_OUT) × I_LOAD

where:

V_Sis the supply voltage.

_OUTis the output voltage.

OUTPUT PHASE REVERSAL

_LOADis the output load current.

The AD856x family is immune to phase reversal. Although the

device’s output does not change phase, large currents due to

input overvoltage could damage the device. In applications

where the possibility of an input voltage exceeding the supply

voltage exists, overvoltage protection should be used as

described in the Input Overvoltage Protection section.

Figure 30 shows the maximum power dissipation vs.

temperature. To achieve proper operation, use the previous

equation to calculate P_DISSfor a specific package at any given

temperature or use Figure 30.

1.25

14-LEAD SOIC

1.00

POWER DISSIPATION

The maximum allowable internal junction temperature of

150°C limits the AD856x family’s maximum power dissipation

of AD856x devices. As the ambient temperature increases, the

maximum power dissipated by AD856x devices must decrease

linearly to maintain the maximum junction temperature. If this

maximum junction temperature is exceeded momentarily, the

device still operates properly once the junction temperature is

reduced below 150°C. If the maximum junction temperature is

exceeded for an extended period, overheating could lead to

permanent damage of the device.

0.75

0.50

0.25

14-LEAD TSSOP

8-LEAD MSOP

5-LEAD SOT-23

–35

–15

AMBIENTTEMPERATURE (°C)

The maximum safe junction temperature, T_JMAX, is 150°C. Using

the following formula, the maximum power that an AD856x

device can safely dissipate as a function of temperature can be

obtained:

Figure 30. Maximum Power Dissipation vs. Temperature

for 5-Lead SC70, 8-Lead MSOP, and 14-Lead TSSOP/SOIC Packages

THERMAL PAD—AD8567

The AD8567 LFCSP comes with a thermal pad that is attached

to the substrate. This substrate is connected to V_DD. To be

electrically safe, the thermal pad should be soldered to an area

_DISS= T_JMAX− T_A/θ_JA

where:

_DISSis the AD856x power dissipation.

_JMAXis the AD856x maximum allowable junction temperature

on the board that is electrically isolated or connected to V_DD

Attaching the thermal pad to ground adversely affects the

performance of the part.

(150°C).

Soldering down this thermal pad dramatically improves the

heat dissipation of the package. It is necessary to attach vias that

connect the soldered thermal pad to another layer on the board.

This provides an avenue to dissipate the heat away from the

part. Without vias, the heat is isolated directly under the part.

T_Ais the ambient temperature of the circuit.

θ_JAis the AD856x package thermal resistance, junction-to-ambient.

Rev. D | Page 10 of 16

1...7 8 91011 12 13...16

中文翻译

下载PDF

AD8565AKSZ-REEL7 替代型号

型号	品牌	替代类型	描述	数据表
AD8565AKS-REEL7	ADI	完全替代	16 V Rail-to-Rail Operational Amplifiers
AD8565AKS-R2	ADI	完全替代	16 V Rail-to-Rail Operational Amplifiers

与AD8565AKSZ-REEL7相关器件

型号	品牌	获取价格	描述	数据表
AD8566	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566_15	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566ARM	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566ARM-R2	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566ARM-REEL	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566ARMZ-R2	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566ARMZ-REEL	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8566WARMZ-REEL	ADI	获取价格	16 V Rail-to-Rail Operational Amplifier (Dual)
AD8567	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers
AD8567_15	ADI	获取价格	16 V Rail-to-Rail Operational Amplifiers

与AD8565AKSZ-REEL7相关文章

压敏电阻器在直流电路中的过压保护应用探讨
2024-06-07

2
电感耐压值及其与电感大小的关系
2024-06-07

5
CNY17F光耦合器：特性、应用、封装、引脚功能及替换型号解析
2024-06-07

4
DS1307资料解析：特性、引脚说明、替代推荐
2024-06-07

3

产品中心

服务支持

精选活动

关于我们

帮助中心

AD8565AKSZ-REEL7

AD8565AKSZ-REEL7 技术参数

AD8565AKSZ-REEL7 数据手册

AD8565AKSZ-REEL7 替代型号

与AD8565AKSZ-REEL7相关器件

与AD8565AKSZ-REEL7相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AD8565AKSZ-REEL7

AD8565AKSZ-REEL7 技术参数

AD8565AKSZ-REEL7 数据手册

AD8565AKSZ-REEL7 替代型号

与AD8565AKSZ-REEL7相关器件

与AD8565AKSZ-REEL7相关文章

您还可以找

您在本页遇到什么问题？