AD7819YRU

更新时间： 2024-02-22 03:49:58

品牌	Logo	应用领域
亚德诺 - ADI		转换器光电二极管
页数	文件大小	规格书
11页	147K
描述
+2.7 V to +5.5 V, 200 kSPS 8-Bit Sampling ADC

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

AD7819YRU 数据手册

AD7819

MICROPROCESSOR INTERFACING

The parallel port on the AD7819 allows the device to be inter-

faced to a range of many different microcontrollers. This section

explains how to interface the AD7819 with some of the more

common microcontroller parallel interface protocols.

PSP0–PSP7

DB0–DB7

PIC16C6x/7x*

AD7819

AD7819 to 8051

Figure 16 shows a parallel interface between the AD7819 and

the 8051 microcontroller. The BUSY signal on the AD7819 pro-

vides an interrupt request to the 8051 when a conversion begins.

Port 0 of the 8051 may serve as an input or output port, or as in

this case when used together, may be used as a bidirectional

low-order address and data bus. The address latch enable out-

put of the 8051 is used to latch the low byte of the address

during accesses to the device, while the high-order address byte

is supplied from Port 2. Port 2 latches remain stable when the

AD7819 is addressed, as they do not have to be turned around

(set to 1) for data input as is the case for Port 0.

INT

BUSY

ADDITIONAL PINS OMITTED FOR CLARITY

Figure 17. Interfacing to the PIC16C6x/7x

AD7819 to ADSP-21xx

Figure 18 shows a parallel interface between the AD7819 and

the ADSP-21xx series of DSPs. As before, the BUSY signal on

the AD7819 provides an interrupt request to the DSP when a

conversion begins.

DB0–DB7

8051*

AD0–AD7

D0–D7

DB0–DB7

AD7819

LATCH

DECODER

A13–A0

AD7819

ALE

ADSP-21xx*

ADDRESS

DECODE

LOGIC

A8–A15

DMS

INT

BUSY

ADDITIONAL PINS OMITTED FOR CLARITY

IRQ

BUSY

Figure 16. Interfacing to the 8051

AD7819 to PIC16C6x/7x

ADDITIONAL PINS OMITTED FOR CLARITY

Figure 18. Interfacing to the ADSP-21xx

Figure 17 shows a parallel interface between the AD7819 and the

PIC16C64/65/74. The BUSY signal on the AD7819 provides

an interrupt request to the microcontroller when a conversion

begins. Of the PIC16C6x/7x range of microcontrollers, only

the PIC16C64/65/74 can provide the option of a parallel slave

port. Port D of the microcontroller will operate as an 8-bit

wide parallel slave port when control bit PSPMODE in the

TRISE register is set. Setting PSPMODE enables the port pin

RE0 to be the RD output and RE2 to be the CS output. For

this functionality, the corresponding data direction bits of the

TRISE register must be configured as outputs (reset to 0). See

user PIC16/17 Microcontroller User Manual.

–10–

REV. A

1...7 8 91011

下载PDF

与AD7819YRU相关器件

型号	品牌	描述	获取价格	数据表
AD7819YRU-REEL	ADI	IC 1-CH 8-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PDSO16, TSSOP-16, Analog to D	获取价格
AD7819YRUZ	ADI	+2.7 V to +5.5 V, 200 kSPS 8-Bit Sampling ADC	获取价格
AD7819YRUZ-REEL	ADI	+2.7 V to +5.5 V, 200 kSPS 8-Bit Sampling ADC	获取价格
AD7819YRUZ-REEL7	ADI	+2.7 V to +5.5 V, 200 kSPS 8-Bit Sampling ADC	获取价格
AD7819YRUZ-REEL7	ROCHESTER	ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, PDSO16,	获取价格
AD7819YRZ	ADI	2.7 V to 5.5 V, 200 kSPS 8-Bit Sampling ADC	获取价格