Single-Channel, 64-Position, Push Button,
8% Resistor Tolerance, Nonvolatile Digital Potentiometer
Data Sheet
AD5116
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
DD
Nominal resistor tolerance error: 8% maximum
Wiper current: 6 mA
DATA
EEPROM
Rheostat mode temperature coefficient: 35 ppm/°C
Low power consumption: 2.5 µA max @ 2.7 V and 125°C
Wide bandwidth: 4 MHz (5 kΩ option)
Power-on EEPROM refresh time < 50 μs
50-year typical data retention at 125°C
1 million write cycles
CONTROL
LOGIC
BLOCK
RDAC
REGISTER
DATA
V
DD
ASE
PU
A
ADAPTIVE
DEBOUNCER
W
B
PD
2.3 V to 5.5 V supply operation
AD5116
Built-in adaptive debouncer
GND
Wide operating temperature: −40°C to +125°C
Thin, 2 mm × 2 mm × 0.55 mm 8-lead LFCSP package
Figure 1.
APPLICATIONS
Table 1. NVM 8% Resistance Tolerance Family
Mechanical potentiometer replacement
Portable electronics level adjustment
Audio volume control
Model
Resistance (kΩ)
Position
128
128
64
Interface
AD5110
AD5111
AD5112
AD5113
AD5116
AD5114
AD5115
10, 80
10, 80
5, 10, 80
5, 10, 80
5, 10, 80
10, 80
I2C
Up/down
I2C
Low resolution DAC
LCD panel brightness and contrast control
Programmable voltage to current conversion
Programmable filters, delays, time constants
Feedback resistor programmable power supply
Sensor calibration
64
64
32
Up/down
Push button
I2C
10, 80
32
Up/down
GENERAL DESCRIPTION
The AD5116 provides a nonvolatile digital potentiometer
solution for 64-position adjustment applications, offering
guaranteed low resistor tolerance errors of 8% and up to
6 mA current density in the A, B, and W pins. The low resistor
tolerance, low nominal temperature coefficient, and high
bandwidth simplify open-loop applications, as well as tolerance
matching applications.
due to contact bounce (commonly found in mechanical
switches). The debouncer is adaptive, accommodating a
variety of push buttons.
The AD5116 can automatically save the last wiper position into
EEPROM, making it suitable for applications that require a
power-up in the last wiper position, for example, audio
equipment.
The new low A-W and B-W resistance feature minimizes
the wiper resistance in the extremes of the resistor array to
typically 45 Ω.
The AD5116 is available in a 2 mm × 2 mm 8-lead LFCSP
package. The part is guaranteed to operate over the extended
industrial temperature range of −40°C to +125°C.
A simple push button interface allows manual control with
just two external push button switches. The AD5116 is designed
with a built-in adaptive debouncer that ignores invalid bounces
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com