Data Sheet
AD4680/AD4681
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 4.
Thermal performance is directly linked to printed circuit
board (PCB) design and operating environment. Careful
attention to PCB thermal design is required.
Parameter
Rating
VCC to Ground (GND)
VLOGIC to GND
Analog Input Voltage to GND
−0.3 V to +4 V
−0.3 V to +4 V
−0.3 V to VREF + 0.3 V, VCC
0.3 V, or 4 V (whichever is
smaller)
−0.3 V to VLOGIC + 0.3 V, or
4 V (whichever is smaller)
−0.3 V to VLOGIC + 0.3 V, or
4 V (whichever is smaller)
+
θJA is the natural convection junction to ambient thermal
resistance measured in a one cubic foot sealed enclosure. θJC is
the junction to case thermal resistance.
Digital Input Voltage to GND
Digital Output Voltage to GND
Table 5. Thermal Resistance
Package Type
θJA
θJC
Unit
CP-16-451
55.4
12.7
°C/W
Reference Input and Output (REFIO) −0.3 V to VCC + 0.3 V, or
Input to GND
Input Current to Any Pin Except
Supplies
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
4 V (whichever is smaller)
10 mA
1 Test Condition 1: thermal impedance simulated values are based on
JEDEC 2S2P thermal test board four thermal vias. See JEDEC JESDS1.
ELECTROSTATIC DISCHARGE (ESD) RATINGS
−40°C to +125°C
−65°C to +150°C
150°C
The following ESD information is provided for handling of
ESD-sensitive devices in an ESD protected area only.
Pb-Free Soldering Reflow
Temperature
260°C
Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.
Field induced charge device model (FICDM) per
ANSI/ESDA/JEDEC JS-002.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the
operational section of this specification is not implied.
Operation beyond the maximum operating conditions for
extended periods may affect product reliability.
ESD Ratings for AD4680/AD4681
Table 6. AD4680/AD4681, 16-Lead LFCSP
ESD Model
Withstand Threshold (V)
Class
3A
C3
HBM
FICDM
4000
1250
ESD CAUTION
Rev. 0 | Page 7 of 29