ACS72981xLR
High-Precision Linear Hall-Effect-Based
Current Sensor IC with 200 µΩ Current Conductor
FEATURES AND BENEFITS
DESCRIPTION
• AEC-Q100 automotive qualification
• High-bandwidth 250 kHz analog output
• Less than 2 μs output response time
• 3.3 V and 5 V supply operation
• Ultralow power loss: 200 μΩ internal conductor
resistance
• Industry-leading noise performance and increased
bandwidth through proprietary amplifier and filter design
techniques
• Greatly improved total output error through digitally
programmed and compensated gain and offset over the
full operating temperature range
• Small package size, with easy mounting capability
• Monolithic Hall IC for high reliability
• Output voltage proportional to AC or DC currents
• Factory-trimmed for accuracy
• Extremely stable zero amp output offset voltage over
temperature and lifetime
TheAllegro™ACS72981familyofcurrentsensorICsprovides
economicalandprecisesolutionsforACorDCcurrentsensing.
A 250 kHz bandwidth makes it ideal for motor control, load
detection and management, power supply and DC-to-DC
converter control, and inverter control. The <2 µs response
time enables overcurrent fault detection in safety-critical
applications.
The device consists of a precision, low-offset linear Hall
circuit with a copper conduction path located near the die.
Applied current flowing through this copper conduction path
generates a magnetic field which the Hall IC converts into a
proportionalvoltage.Deviceaccuracyisoptimizedthroughthe
close proximity of the magnetic signal to the Hall transducer.
A precise, proportional output voltage is provided by the
low-offset, chopper-stabilized BiCMOS Hall IC, which is
programmed for accuracy at the factory. Proprietary digital
temperature compensation technology greatly improves the
zero output voltage and output sensitivity accuracy over
temperature and lifetime.
The output of the device increases when an increasing current
flows through the primary copper conduction path (from
terminal 5 to terminal 6), which is the path used for current
sampling. The internal resistance of this conductive path is
200μΩtypical,providinglowpowerlossandincreasingpower
density in the application.
PACKAGE:
7-pin PSOF package (suffix LR)
Thesensoremploysdifferentialsensingtechniquesthatvirtually
eliminate output disturbance due to common-mode interfering
magnetic field.
Not to scale
Continued on the next page…
ACS72981xLR
3
2
5
6
VIOUT
GND
IP+
VOUT
CL
IP
Supply
CBYP
0.1 µF
IP–
1
VCC
Typical Application
The ACS72981xLR outputs an analog signal, VOUT, that varies linearly with the
bidirectional AC or DC primary sampled current, IP, within the range specified.
ACS72981xLR-DS, Rev. 9
MCO-0000374
September 24, 2020