ACS732KMA and ACS733KMA
1 MHz Bandwidth, Galvanically Isolated
Current Sensor IC in SOIC-16 Package
FEATURES AND BENEFITS
DESCRIPTION
• AEC-Q100 automotive qualified
The ACS732KMA and ACS733KMA are a new generation
of high bandwidth current sensor ICs from Allegro™. These
• High bandwidth, 1 MHz analog output
• Differential Hall sensing rejects common-mode fields
• High-isolation SOIC16 wide body package provides
galvanic isolation for high-voltage applications
• Industry-leading noise performance with greatly
improved bandwidth through proprietary amplifier and
filter design
• UL 60950-1 (ed. 2) and UL 62368 (ed. 1) certified
□ Dielectric Strength Voltage = 4.8 kVRMS
□ Basic Isolation Working Voltage = 1097 VRMS
□ Reinforced Isolation Working Voltage = 550 VRMS
• Fast and externally configurable overcurrent fault
detection
• 0.85 mΩ primary conductor resistance for low power loss
and high inrush current withstand capability
• Options for 3.3 V and 5 V single supply operation
• Output voltage proportional to AC and DC current
• Factory-trimmed sensitivity and quiescent output voltage
for improved accuracy
devices provide a compact, fast, and accurate solution for
measuring high-frequency currents in DC/DC converters and
otherswitchingpowerapplications.TheACS732andACS733
offer high isolation, high bandwidth Hall-effect-based current
sensing with user-configurable overcurrent fault detection.
These features make them ideally suited for high-frequency
transformerandcurrenttransformerreplacementinapplications
running at high voltages.
TheACS732andACS733aresuitableforallmarkets,including
automotive, industrial, commercial, and communications
systems. They may be used in motor control, load detection
andmanagement,switch-modepowersupplies,andovercurrent
fault protection applications.
The wide body SOIC-16 package allows for easy
implementation. Applied current flowing through the copper
conductionpathgeneratesamagneticfieldthatissensedbythe
IC and converted to a proportional voltage. Current is sensed
differentially in order to reject external common-mode fields.
Deviceaccuracyisoptimizedthroughthecloseproximityofthe
magnetic field to the Hall transducers. A precise, proportional
voltageisprovidedbytheHallIC,whichisfactory-programmed
afterpackagingforhighaccuracy.Thefullyintegratedpackage
hasaninternalcopperconductivepathwithatypicalresistance
of 0.85 mΩ, providing low power loss.
• Ratiometric output from supply voltage
PACKAGE: 16-Pin SOICW (suffix MA)
The current-carrying pins (pins 1 through 8) are electrically
isolated from the sensor leads (pins 9 through 16). This allows
the devices to be used in high-side current sensing applications
without the use of high-side differential amplifiers or other
costly isolation techniques.
CB Certificate Number:
US-32210-M3-UL
US-36315-UL
Not to scale
Continued on next page...
RPU
CBYPASS
1
16
15
14
13
12
11
10
9
IP+
IP+
IP+
IP+
IP–
IP–
IP–
IP–
VOC
VCC
2
3
4
5
6
7
8
ACS733
ACS732/ACS733 outputs
an analog signal, VIOUT, that
changes proportionally with
the bidirectional AC or DC
primary sensed current, IP,
within the specified mea-
surement range.
VCC
FAULT
VIOUT
GND
IP
CL
GND
The overcurrent threshold
may be set with a resistor
divider tied to the VOC pin.
PROGRAM
Figure 1: Typical Application Circuit
October 7, 2020
ACS732-33KMA-DS, Rev. 6
MCO-0000589