ACPL-C79B, ACPL-C79A, ACPL-C790
Precision Miniature Isolation Amplifiers
Data Sheet
Description
Features
The ACPL-C79B/C79A/C790 isolation amplifiers are • ±0.ꢁ1 High Gain Accuracy (ACPL-C79B)
designed for current and voltage sensing in electronic
power converters in applications including motor drives
and renewable energy systems. In a typical motor drive
• –ꢁ0 ppm/°C Low Gain Drift
• 0.4 mV Input Offset Voltage
implementation, current flows through an external • 0.0ꢁ1 Excellent Linearity
resistor and the resulting analog voltage drop is sensed by
the isolation amplifier. A differential output voltage that is
proportional to the current is created on the other side of
• 62 dB SNR
• 200 kHz Wide Bandwidth
the optical isolation barrier.
• ꢀ V to ꢁ.ꢁ V Wide Supply Range for Output Side
• –40°C to +±0ꢁ°C Operating Temperature Range
• Advanced Sigma-Delta (∑-∆) A/D Converter Technology
• Fully Differential Isolation Amplifier
For general applications, the ACPL-C79A (±±1 gain
tolerance) and the ACPL-C790 (±ꢀ1 gain tolerance)
are recommended. For high precision applications, the
ACPL-C79B (±0.ꢁ1 gain tolerance) can be used. The
product operates from a single ꢁ V supply and provides
excellent linearity and dynamic performance of 62 dB SNR.
With 200 kHz bandwidth, ±.6 µs fast response time, the
product captures transients in short circuit and overload
conditions. The high common-mode transient immunity
(±ꢁ kV/µs) of the ACPL-C79B/C79A/C790 provides the
precision and stability needed to accurately monitor
motor current in high noise motor control environments,
providing for smoother control (less “torque ripple”) in
various types of motor control applications.
• ±ꢁ kV/µs Common-Mode Transient Immunity
• Compact, Auto-Insertable Stretched SO-8 Package
• Safety and Regulatory Approvals:
– IEC/EN/DIN EN 60747-ꢁ-ꢁ: ±4±4 Vpeak working
insulation voltage
– UL ±ꢁ77: ꢁ000 Vrms/±min double protection rating
– CSA: Component Acceptance Notice #ꢁ
Applications
• Current/Voltage Sensing in AC and Servo Motor Drives
• Solar Inverters, Wind Turbine Inverters
• Industrial Process Control
Combined with superior optical coupling technology, the
ACPL-C79B/C79A/C790 implements sigma-delta (∑-∆)
analog-to-digital converter, chopper stabilized ampli-
fiers, and a fully differential circuit topology to provide
unequaled isolation-mode noise rejection, low offset,
high gain accuracy and stability. This performance is
delivered in a compact, auto-insertable Stretched SO-8
(SSO-8) package that meets worldwide regulatory safety
standards.
• Data acquisition systems
• Switching Power Supply Signal Isolation
• General Purpose Analog Signal Isolation
• Traditional Current Transducer Replacements
Functional Diagram
IDD1
IDD2
VDD1
8
7
VDD2
1
2
VIN+
VOUT+
+
-
+
-
VIN-
3
4
6 VOUT-
GND2
NOTE:
GND1
5
A 0.± µF bypass capacitor must be connected
between pins ± and 4 and between pins ꢁ and 8.
SHIELD
Figure 1.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
5秒后页面跳转
SG3525资料手册详解：SG3525参数分析、引脚说明、应用介绍
AT89C51单片机资料手册详细解析及应用示例
CP2102资料手册解读：CP2102引脚说明、关键参数分析
资料手册解读：UC3842参数和管脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
