ACPL-C87AT/ACPL-C87BT
Automotive High Precision DC Voltage Isolation Sensor
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The ACPL-C87AT/C87BT isolation sensors utilize superior •ꢀ Unity Gain
optical coupling technology, with sigma-delta (S-D)
•ꢀ +/-0.5% (ACPL-C87BT) and +/-1% (ACPL-C87AT) Gain
analog-to-digital converter, chopper stabilized amplifiers,
and a fully differential circuit topology to provide
unequaled isolation-mode noise rejection, low offset,
high gain accuracy and stability.
Tolerance @ 25° C
•ꢀ -0.3 mV Input Offset Voltage
•ꢀ 0.05% Non Linearity
•ꢀ 25 ppm/°C Gain Drift vs. Temperature
•ꢀ 100 kHz Bandwidth
ACPL-C87AT ( 1% gain tolerance) and ACPL-C87BT
( 0.5% gain tolerance) are designed for high precision
DC voltage sensing in electronic motor drives, DC/DC
and AC/DC converter and battery monitoring system. The
ACPL-C87AT/C87BT features high input impedance and
operate with full span of analog input voltage up to 2.46 V.
The shutdown feature provides power saving and can be
controlled from external source, such as microprocessor.
•ꢀ 0 to 2 V Nominal Input Range
•ꢀ Qualified to AEC-Q100 Grade 1 Test Guidelines
•ꢀ Operating Temperature: -40° C to +125° C
•ꢀ Shutdown Feature (Active High)
•ꢀ 15 kV/ms Common-Mode Rejection at V = 1 kV
CM
The high common-mode transient immunity (15 kV/ms)
of the ACPL-C87AT/C87BT maintains the precision and
•ꢀ Working Voltage, V
= 1414 V
peak
IORM
stability needed to accurately monitor DC rail voltage in •ꢀ Compact, Surface Mount Stretched SO8 Package
high noise motor control environments. This galvanic safe
isolation solution is delivered in a compact, surface mount
stretched SO-8 (SSO-8) package that meets worldwide
regulatory safety standards.
•ꢀ Worldwide Safety Approval:
– UL 1577 (5000 V
– CSA
/ 1 min.)
RMS
2
– IEC/EN/DIN EN 60747-5-5
Avago R Coupler isolation products provide the rein-
forced insulation and reliability needed for critical auto-
motive and high temperature industrial applications.
Applications
•ꢀ Automotive BMS Battery Pack Voltage Sensing
•ꢀ Automotive DC/DC Converter Voltage Sensing
•ꢀ Automotive Motor Inverter DC Bus Voltage Sensing
•ꢀ Automotive AC/DC (Charger) DC Output Voltage Sensing
•ꢀ Isolation Interface for Temperature Sensing
Functional Diagram
VDD1
VDD2
8
7
6
1
2
VIN
VOUT+
VOUT-
0.1 µF
0.1 µF
SHDN
3
4
•ꢀ General Purpose Voltage Sensing and Monitoring
5
SHIELD
GND1
GND2
Figure 1. Functional Diagram
0.1 mF bypass capacitor must be connected between pin 1 and pin 4, and
pin 5 and pin 8 as shown.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.