A8519 and
A8519-1
Wide Input Voltage Range, High-Efficiency,
Fault-Tolerant LED Driver
Revision History
Number
Date
September 10, 2014 Initial Release
Description
–
1
2
3
4
October 24, 2014
March 18, 2015
May 19, 2015
Lowered minium fSW (when using RFSET) to 200 kHz and SYNC down to 260 kHz.
Revised OVP Thresholds and Oscillator Frequencies.
Added A8519-1 variant.
June 10, 2015
Fixed typo on page 2; revised FSET pin voltage typical spec.
Amended “Enabling the IC” (page 12) and “Synchronization” (page 15) of Functional Description;
5
November 4, 2015 inserted Figures 18 and 19; updated Selection Guide table (page 2); corrected 2nd Typical Application
Drawing (page 9)
6
7
January 8, 2016
October 24, 2016
Amended “Powering Up: Boost Output Undervoltage Protection” (page 13)
Updated Input Overcurrent Protection and Disconnect Switch section (page 22)
Copyright ©2016, Allegro MicroSystems, LLC
Allegro MicroSystems, LLC reserves the right to make, from time to time, such departures from the detail specifications as may be required to
permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that
the information being relied upon is current.
Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of
Allegro’s product can reasonably be expected to cause bodily harm.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its
use; nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
Allegro MicroSystems, LLC
115 Northeast Cutoff
35
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com