5秒后页面跳转
A8519-1 PDF预览

A8519-1

更新时间: 2024-02-18 18:27:12
品牌 Logo 应用领域
急速微 - ALLEGRO /
页数 文件大小 规格书
35页 4309K
描述
Fully integrated 42 V MOSFET for boost converter

A8519-1 数据手册

 浏览型号A8519-1的Datasheet PDF文件第28页浏览型号A8519-1的Datasheet PDF文件第29页浏览型号A8519-1的Datasheet PDF文件第30页浏览型号A8519-1的Datasheet PDF文件第32页浏览型号A8519-1的Datasheet PDF文件第33页浏览型号A8519-1的Datasheet PDF文件第34页 
A8519 and  
A8519-1  
Wide Input Voltage Range, High-Efficiency,  
Fault-Tolerant LED Driver  
Step 8: Selection of input capacitor. The input capacitor needs to  
be selected such that it provides good filtering of the input volt-  
age waveform. A good rule of thumb is to set the input voltage  
ripple ΔVIN to be 1% of the minimum input voltage. The mini-  
mum input capacitor requirements are as follows:  
larger input capacitor. A larger input capacitor is also required to  
have stable input voltage during line transients. Combinations of  
aluminum electrolytic and ceramic capacitors can be used.  
Step 9: Choosing the input disconnect switch components.  
Set the input disconnect current limit to 4.25 A.  
ΔIL(used)  
8 × fSW × ΔV  
CIN =  
0.11 V  
IN  
RSC =  
= 0.0259 Ω  
4.25 A  
0.375 A  
8 × 2 MHz × 0.1 V  
The RSC chosen is 0.024 ohms. Therefore, the voltage drop across  
RSC is:  
CIN =  
= 0.234 µF  
= 0.1 A  
ΔIL(used)  
IIN(max)  
VSC = 4.25 A×0.024 Ω = 0.102 V  
VVSENSE(trip) – VSC  
IOUT  
×
CIN(rms)  
=
(1 – DMAX )× 12  
Radj =  
Iadj  
0.375 A  
0.240 A ×  
0.11 V – 0.102 V  
1.06 A  
Radj =  
= 372 Ω  
CIN(rms)  
=
= 0.1 A  
21.5 µA  
(1 – 0.75) × 12  
A value of 383 W was chosen for this design. The disconnect  
switch Q1 works as on or off. Therefore, the Radj value is not  
really critical.  
A good ceramic input capacitor with ratings of 50 V / 2.2 µF or  
50 V / 4.7 µF will suffice for this application.  
For the input disconnect switch, an AO4421 6.2 A / 60 V P-chan-  
nel MOSFET is selected.  
Vendor  
Murata  
Murata  
Value  
Part Number  
4.7 µF / 50 V  
2.2 µF / 50 V  
GRM32ER71H475KA88L  
GRM31CR71H225KA88L  
To achieve proper operation at low dimming ratios, connect an  
RC filter to the VOUT pin. Use R = 10 kW and C = 47 pF.  
If long wires are used for the input, it is necessary to use a much  
Allegro MicroSystems, LLC  
115 Northeast Cutoff  
31  
Worcester, Massachusetts 01615-0036 U.S.A.  
1.508.853.5000; www.allegromicro.com  

与A8519-1相关器件

型号 品牌 获取价格 描述 数据表
A8519KETTR-R ALLEGRO

获取价格

Fully integrated 42 V MOSFET for boost converter
A8519KETTR-R-1 ALLEGRO

获取价格

Fully integrated 42 V MOSFET for boost converter
A8519KLPTR-T ALLEGRO

获取价格

Fully integrated 42 V MOSFET for boost converter
A8519KLPTR-T-1 ALLEGRO

获取价格

Fully integrated 42 V MOSFET for boost converter
A8520E24A91 ANAREN

获取价格

Operates in the 2.4GHz ISM band
A8520E24A91-EM2 ANAREN

获取价格

The A8520E24A91-EM2 is a high-performance
A8521 ALLEGRO

获取价格

The A8521 is a multi-output white LED driver for small-size LCD backlighting.
A8521KLPTR-T ALLEGRO

获取价格

The A8521 is a multi-output white LED driver for small-size LCD backlighting.
A8530 ALLEGRO

获取价格

Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver
A8530EES-T ALLEGRO

获取价格

Display Driver, PQCC16