A80606 and
A80606-1
High Power LED Driver with Pre-Emptive Boost
for Ultra-High Dimming Ratio and Low Output Ripple
ELECTRICAL CHARACTERISTICS [1] (continued): Unless otherwise noted, specifications are valid at VIN = 12 V, TJ = 25°C, • indi-
cates specifications guaranteed over the full operating temperature range with TJ = –40°C to 125°C, typical specifications are at TJ = 25°C
Characteristics
Symbol
Test Conditions
Min.
Typ.
Max.
Unit
THERMAL PROTECTION (TSD)
Thermal Shutdown Threshold [2]
Thermal Shutdown Hysteresis [2]
TSD
Temperature rising
155
170
20
−
−
°C
°C
TSDHYS
−
[1] For input and output current specifications, negative current is defined as coming out of the node or pin (sourcing);
positive current is defined as going into the node or pin (sinking).
[2] Ensured by design and characterization; not production tested.
[3] Minimum VIN = 4.5 V is only required at startup. After startup is completed, IC can continue to operate down to VIN = 4 V.
[4] LED current is trimmed to cancel variations in both Gain and ISET voltage.
9
Allegro MicroSystems
955 Perimeter Road
Manchester, NH 03103-3353 U.S.A.
www.allegromicro.com