Sealed Rotary DIP Switch
A6A
Subminiature DIP Switch for High-Density
Packaging
• Series includes a Cone type that can be operated from the
top or side, an extended shaft type that can be operated
while mounted on a panel, and a flat type.
• A slider lock and rotating PCB system achieve stable
contact reliability.
• Sealed construction equivalent to IP64 (IEC 60529) prevents
flux penetration and provides high contact reliability even in
dusty locations and locations where water is used
• RoHS Compliant
Ordering Information
Part Numbers
Standard (Cone)
Flat
Extended shaft
Thumbwheel
Output code
No. of positions
BCD 1-2-4-8
A6A-10R
A6A-10C
A6A-16R
A6A-16C
A6A-10RF
A6A-10CF
A6A-16RF
A6A-16CF
A6A-10RS
A6A-10CS
A6A-16RS
A6A-16CS
A6A-10RW
A6A-10CW
A6A-16RW
A6A-16CW
10
BCD 1-2-4-8 complement
BCD Hexadecimal 1-2-4-8
BCD Hexadecimal 1-2-4-8 complement
16
Important Note: Switches cannot be water-washed.
Specifications
■ Characteristics
Switching capacity
Contact resistance
Insulation resistance
Dielectric strength
100 mA at 28 VDC, 1 mA at 5 VDC (minimum load)
200 MΩ max.
10 MΩ min. (at 250 VDC)
500 VAC for 1 minute between current-carrying metal part and ground
250 VAC for 1 minute between terminals
120 to 250 g-cm (1.18 to 2.45 x 10-2 N·m) max.
10 to 55 Hz, 1.5 mm double amplitude
300 m/s2 (30 G) min.
Operating torque
Vibration resistance
Shock resistance
Malfunction durability
Malfunction durability
Ambient operating temperature
Ambient operating humidity
-10° to 70°C at 60% RH max. (with no icing or condensation)
45% to 85% RH (at 5 to 35°C)
Service life
Mechanical
Electrical
10,000 detent operations min.
2,000 detent operations min.
Weight
Cone: Approx. 0.8 g
Flat: Approx. 0.7 g
Extended shaft: Approx. 0.8g
Thumbwheel: Approx. 1.0g
Note: Data shown are of initial value.
Sealed Rotary DIP Switch A6A
285