Datasheet > 存储 > 闪存> A29001UL-90F

A29001UL-90F

更新时间： 2024-01-17 19:48:50

品牌	Logo	应用领域
联笙电子 - AMICC		闪存存储内存集成电路
页数	文件大小	规格书
36页	454K
描述
128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

A29001UL-90F 技术参数

是否Rohs认证：	符合	生命周期：	Contact Manufacturer
零件包装代码：	QFJ	包装说明：	LEAD FREE, PLASTIC, LCC-32
针数：	32	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8542.32.00.51
风险等级：	5.55	Is Samacsys：	N
最长访问时间：	90 ns	其他特性：	BOTTOM BOOT SECTOR
启动块：	BOTTOM	命令用户界面：	YES
数据轮询：	YES	JESD-30 代码：	R-PQCC-J32
长度：	13.97 mm	内存密度：	1048576 bit
内存集成电路类型：	FLASH	内存宽度：	8
功能数量：	1	部门数/规模：	1,2,1,3
端子数量：	32	字数：	131072 words
字数代码：	128000	工作模式：	ASYNCHRONOUS
最高工作温度：	70 °C	最低工作温度：
组织：	128KX8	封装主体材料：	PLASTIC/EPOXY
封装代码：	QCCJ	封装等效代码：	LDCC32,.5X.6
封装形状：	RECTANGULAR	封装形式：	CHIP CARRIER
并行/串行：	PARALLEL	电源：	5 V
编程电压：	5 V	认证状态：	Not Qualified
座面最大高度：	3.4 mm	部门规模：	8K,4K,16K,32K
最大待机电流：	0.000005 A	子类别：	Flash Memories
最大压摆率：	0.04 mA	最大供电电压 (Vsup)：	5.5 V
最小供电电压 (Vsup)：	4.5 V	标称供电电压 (Vsup)：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	COMMERCIAL	端子形式：	J BEND
端子节距：	1.27 mm	端子位置：	QUAD
切换位：	YES	类型：	NOR TYPE
宽度：	11.43 mm	Base Number Matches：	1

A29001UL-90F 数据手册

A29001/290011 Series

128K X 8 Bit CMOS 5.0 Volt-only,

Boot Sector Flash Memory

Features

ꢀTypical 100,000 program/erase cycles per sector

ꢀ20-year data retention at 125°C

- Reliable operation for the life of the system

ꢀCompatible with JEDEC-standards

ꢀ5.0V ± 10% for read and write operations

ꢀAccess times:

- 55/70/90 (max.)

ꢀCurrent:

- 20 mA typical active read current

- 30 mA typical program/erase current

- 1 µA typical CMOS standby

- Pinout and software compatible with single-power-

supply Flash memory standard

- Superior inadvertent write protection

ꢀFlexible sector architecture

ꢀ

Polling and toggle bits

Data

- 8 Kbyte/ 4 KbyteX2/ 16 Kbyte/ 32 KbyteX3 sectors

- Any combination of sectors can be erased

- Supports full chip erase

- Provides a software method of detecting completion

of program or erase operations

ꢀErase Suspend/Erase Resume

- Sector protection:

- Suspends a sector erase operation to read data

from, or program data to, a non-erasing sector, then

resumes the erase operation

A hardware method of protecting sectors to prevent

any inadvertent program or erase operations within

that sector

ꢀHardware reset pin (

)

RESET

ꢀTop or bottom boot block configurations available

ꢀEmbedded Erase Algorithms

- Hardware method to reset the device to reading array

data (not available on A290011)

ꢀIndustrial operating temperature range: -40°C to +85°C

for – U

ꢀPackage options: 32-pin P-DIP, PLCC, TSOP or

sTSOP (Forward type)

- Embedded Erase algorithm will automatically erase

the entire chip or any combination of designated

sectors and verify the erased sectors

- Embedded Program algorithm automatically writes

and verifies bytes at specified addresses

General Description

The A29001 is a 5.0 volt-only Flash memory organized as

131,072 bytes of 8 bits each. The A29001 offers the

The A29001 is entirely software command set compatible

with the JEDEC single-power-supply Flash standard.

Commands are written to the command register using

standard microprocessor write timings. Register contents

serve as input to an internal state-machine that controls the

erase and programming circuitry. Write cycles also

internally latch addresses and data needed for the

programming and erase operations. Reading data out of

the device is similar to reading from other Flash or EPROM

devices.

Device programming occurs by writing the proper program

command sequence. This initiates the Embedded Program

algorithm - an internal algorithm that automatically times

the program pulse widths and verifies proper program

margin.

function, but it is not available on A290011. The

RESET

128 Kbytes of data are further divided into seven sectors for

flexible sector erase capability. The 8 bits of data appear on

I/O⁰- I/O7 while the addresses are input on A0 to A16. The

A29001 is offered in 32-pin PLCC, TSOP, sTSOP and PDIP

packages. This device is designed to be programmed in-

system with the standard system 5.0 volt VCC supply.

Additional 12.0 volt VPP is not required for in-system write

or erase operations. However, the A29001 can also be

programmed in standard EPROM programmers.

The A29001 has the first toggle bit, I/O⁶, which indicates

whether an Embedded Program or Erase is in progress, or it

is in the Erase Suspend. Besides the I/O6 toggle bit, the

A29001 has a second toggle bit, I/O², to indicate whether

the addressed sector is being selected for erase. The

A29001 also offers the ability to program in the Erase

Suspend mode. The standard A29001 offers access times

of 55, 70 and 90 ns allowing high-speed microprocessors to

operate without wait states. To eliminate bus contention the

Device erasure occurs by executing the proper erase

command sequence. This initiates the Embedded Erase

algorithm

- an internal algorithm that automatically

preprograms the array (if it is not already programmed)

before executing the erase operation. During erase, the

device automatically times the erase pulse widths and

verifies proper erase margin.

device has separate chip enable (

), write enable (

)

and output enable (

) controls.

The host system can detect whether a program or erase

The device requires only a single 5.0 volt power supply for

both read and write functions. Internally generated and

regulated voltages are provided for the program and erase

operations.

operation is complete by reading the I/O⁷(

Polling)

Data

and I/O⁶(toggle) status bits. After a program or erase

cycle has been completed, the device is ready to read

array data or accept another command.

(December, 2004, Version 1.3)

AMIC Technology, Corp.

123 4 5 6 7...36

下载PDF

与A29001UL-90F相关器件

型号	品牌	描述	获取价格	数据表
A29001UV-55	AMICC	128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory	获取价格
A29001UV-55F	AMICC	128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory	获取价格
A29001UV-70	AMICC	128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory	获取价格
A29001UV-70F	AMICC	128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory	获取价格
A29001UV-90	AMICC	128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory	获取价格
A29001UV-90F	AMICC	128K X 8 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory	获取价格

与A29001UL-90F相关文章

PCF8574资料解读：主要参数分析、引脚说明
2024-05-21

5
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
2024-05-21

4
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
2024-05-21

7
一文带你了解压敏电阻器在直流电路中的过压保护作用
2024-05-21

3

产品中心

服务支持

精选活动

关于我们

帮助中心

A29001UL-90F

A29001UL-90F 技术参数

A29001UL-90F 数据手册

与A29001UL-90F相关器件

与A29001UL-90F相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

A29001UL-90F

A29001UL-90F 技术参数

A29001UL-90F 数据手册

与A29001UL-90F相关器件

与A29001UL-90F相关文章

您还可以找

您在本页遇到什么问题？