Panel Mount
Datasheet
MECHANICAL SPECIFICATIONS (5)
Tolerances: 0.02 ꢀn ꢁ 0.5 ꢂꢂ
All dꢀꢂensꢀons are ꢀn: ꢀnches [ꢂꢀllꢀꢂeters]
(2)
Screw Termination
Hex Standoff Termination (“K” Option)
1.1
1.1
Mounting
0.89
[22.6]
[27.9]
1.04
[26.4]
[27.9]
Hole/Slot
0.19 [4.9]
DIA.
Mounting
0.49
[12.4]
0.49
[12.4]
Hole/Slot
0.19 [4.9]
DIA.
2
3
1
OUTPUT
2
3
1
OUTPUT
S O L I D S T AT E R E L AY
2.25
[57.3]
1.70
[43.2]
1.88
[47.6]
S O L I D S T AT E R E L AY
2.25
[57.3]
1.88
[47.6]
1.7
[43.2]
4
INPUT
4
INPUT
0.93
[23.6]
1.0
1.0
[25.4]
[25.4]
(4 places)
1.75
[44.5]
1.75
[44.5]
1.0
[25.4]
(2 places)
Quick Connect Termination (“F” Option) - Up to 25 Amp (1)
Quick Connect Termination (“F” Option) - Up to 50 Amp (1)
Faston Terminal(16)
0.25 x 0.032
1.58
1.58
[40.2]
0.63
1.31
[33.4]
1.31
[33.4]
Faston Terminal(16)
0.25 x 0.032
[40.2]
Mounting
Hole/Slot
0.19 [4.9]
DIA.
Mounting
Hole/Slot
0.19 [4.9]
DIA.
(4 places)
0.49
[12.4]
(2 places)
[16.0]
0.45
[11.4]
(2 places)
2
3
1
OUTPUT
2
3
1
OUTPUT
S O L I D S T AT E R E L AY
S O L I D S T AT E R E L AY
2.25
[57.3]
1.88
[47.6]
1.7
[43.2]
2.25
[57.3]
1.88
[47.6]
1.7
[43.2]
4
INPUT
4
INPUT
0.49
1.40
Faston Terminal(16)
0.187 x 0.020
[12.4]
[35.6]
Faston Terminal(16)
0.187 x 0.020
1.40
[35.6]
1.75
1.25
[31.8]
1.75
[44.5]
1.25
[31.8]
(2 places)
(2 places)
[44.5]
GENERAL NOTES
(1) Single pair (up to 25A) Double pair* (up to 50A). *Caution: User must connect both pairs.
(2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50
Amps. For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.
(3) Output will self trigger between 450-600Vpk, Min., not suitable for capacitive loads.
(4) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.
(5) All parameters at 25°C unless otherwise specified.
(6) Heat sinking required, see derating curves.
(7) For 40mA minimum current, the voltage drop increases over maximum rated.
(8) Maximum turn-on voltage for -B option is: 1VDC for DC control, 10Vrms for AC control, and 4Vrms for E control range.
(9) For relays with option “G” minimum control voltage is 4.5VDC.
(10) Must turn-off voltage for -B option is: 3VDC for DC control, 90Vrms for AC control, and 18Vrms for E control range.
(11) Turn-on time for Instantaneous turn-on versions is 0.02 msec (DC Control Models).
(12) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).
(13) Load can be wired to either SSR output terminal 1 or 2.
(14) Elective Input Status LED, “G” option.
(15) Elective Overvoltage Protection, “P” option.
(16) Mechanical dimensions vary from G3 models.
For additional information or specific questions, contact Crydom Technical Support.
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
